Zeroflats anti-defective milk, 60 ml
- Zero flats is a latex milk with a nanoseal composition, which is installed inside the tire, and in the event of a puncture, it collapses and forms a flexible and permanent connector.
- Zero flats replaces inner tubes and performs puncture repairs immediately. It can also be used on regular tires. With this, we can reduce the weight of the bike by up to 200g.
- Zero flats recommends using Schwalbe, Continental, Kenda tires. It is important to use tires that have a high-quality tread.
-Zero Flats can be blown CO2 bomb.
SAFETY PRECAUTIONS Avoid contact with eyes and clothing during installation. Zero flats contains ammonia, which can cause eye irritation. Use safety glasses. If Zero flats gets in your eyes, wash them with clean water. Zero flats is soluble in water, do not let it dry if it gets on clothing, and wash it as soon as possible. Usage: 60ml per wheel
INSTALLATION
To seal 1 wheel, you need 60ml of Zero flats milk. If you use Tubeless, TNT or Tubeless Ready tires, you only need a workshop pump or CO2. Place the tire on the rim and inflate it so that the bead of the tire fits into the rim. Then unscrew the valve and pour 60ml of Zero flats and inflate to the required pressure. When installing regular tires, the procedure is the same, but you will need a compressor to inflate.
product ID | 3117 |