Marin Alcatraz 2 26 bike, red/purple
Choose in-person pick-up at the store and decide on the spot.
Marin Alcatraz 2 26 bike
| Frame |
Series 3 6061 Aluminum, 26" Wheels, 135x10 mm Horizontal Dropouts, 73 mm Threaded BB, ISCG 05 Tabs
|
| Fork |
Manitou Circus Expert, 26", 100 mm Travel, Coil Spring, Taper Steerer Tube, 20x110 mm Thru Axle
|
| Chain |
KMC HL-1
|
| Cranks |
Marin Forged Alloy, Alloy 32T Chainring, 104mm BCD, 170mm Crank Length
|
| Rear brake |
Tektro HD-M535, 4 Piston Hydraulic Disc, 160 mm Rotor
|
| Brake levers |
Tektro HD-M535
|
| Rims |
Marin Custom Extrusion, 27mm Inner, Pinned Joint
|
| Front hub |
Forged Alloy, 110x20 mm, Disc, 32H
|
| Rear hub |
Forged Alloy, 135x10 mm, Bolt-On, Quad Sealed Bearings, Disc, 32H
|
| Tires |
Vee Tire, XCV 26x2.25", LSG Compound, Wire Bead
|
| Seat post |
Marin Alloy, 30.9 mm
|
| Saddle |
Marin DJ Saddle
|
| Stem |
Marin CNC Stem, 35 mm Clamp
|
| Handlebars |
PNW Range Handlebar, 38mm Rise, 35mm Clamp, 800mm Width
|
| Grips |
Marin Grizzly Lock-On
|
| Headset |
FSA No 57E, Semi-Sealed Cartridge Bearings, 1 1/8" x 1 1/2"
|
| Bottom bracket |
External Sealed Cartridge Bearings
|
| Pedals |
Alloy Platform
|
| Pinion |
14T Single Speed Cog
|
| Sex | Men, Unisex |
| Model year | 2026 |
| Gears | 1x1 |
| Groupset | Other |
| Colour | red/purple |
| Material | aluminium |
| Wheel diameter | 26" |
| Brakes | Mechanical disc |
| Fork | Spring |
| product ID | 387009 |
| Bike size | Short | Long |
|---|---|---|
| Height (cm) | < 170 cm | 170 - 191 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews