Lapierre Overvolt AM CF 6.8 29/27.5 electric bike, deep emerald green satin
Bike fitting discount 100 % (you will save 200 €) Free
Lapierre Overvolt AM CF 6.8 29/27.5 electric bike
| Drive |
Bosch Performance Line CX, 600 W, 85 Nm, 25 km/h
|
| Battery |
Bosch PowerTube, 800 Wh
|
| Display |
Bosch System Controller BRC3200 Kiox 400C
|
| Frame |
carbon, Boost 110/148 mm, disc brake Post Mount, Travel: 170 mm
|
| Fork |
RockShox ZEB Base, air, Travel: 170 mm, aluminum shaft 1 1/8" - 1 1/2" tapered, 15x110 mm thru-axle Boost
|
| Shock |
RockShox Deluxe Select Plus, air
|
| Shifting |
SRAM Eagle 90 T-Type, Trigger shifter
|
| Derailleur |
SRAM Eagle 90 T-Type, 12-speed
|
| Cassette |
SRAM XS 1270 T-Type 10-52T
|
| Chain |
SRAM Eagle 70
|
| Crankset |
Sram XX T-Type, 32T
|
| Brakes |
SRAM Maven Base, aluminum, 200mm/200mm
|
| Brake levers |
SRAM Maven Base Shift-Brake-Lever
|
| Wheels |
DT Swiss H1900
|
| Tires |
Continental Kryptoptal F, 60-622/Continental Kryptotal R, 60-584
|
| Saddle |
Prologo Proxim W450
|
| Stem |
XLC ST-M50, A-head
|
| Handlebars |
XLC HB-M34, 800 mm
|
| Grips |
XLC Gravity Grip
|
| Headset |
Acros Integrated ZS56/ZS56 Block Lock
|
| Pedals |
XLC PD-M29 aluminum
|
| Sex | Men, Unisex |
| Model year | 2026 |
| Gears | 1x12 |
| Groupset | Other |
| Colour | deep emerald green satin |
| Material | carbon fiber |
| Wheel diameter | front 29"/rear 27.5" |
| Drive | Bosch Performance CX |
| Battery | 800 Wh |
| Brakes | Hydraulic disc |
| Fork | Air |
| Fork travel | 170 mm |
| Rear travel | 170 mm |
| Dropper post | yes |
| Shock type | Air |
| product ID | 360114 |
| Bike size | L | M | S | XL |
|---|---|---|---|---|
| Height (cm) | 180 - 190 cm | 170 - 180 cm | 160 - 170 cm | > 190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews