BBB BHS-36 DownForce stem
|
Forged 3D one-piece construction
|
|
Black print on stem body
|
|
Stainless steel bolts for tight adjustment
|
|
Designed for MTB handlebars with a diameter of 31.8 mm
|
| Colour | black |
| Stem length | 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 110 mm |
| Handlebar diameter | 31.8 mm |
| Stem inclination (+/-) | 17° |
| Internal wiring | no |
| Fork post | Ø - 28.6 mm (1 1/8") |
| Weight | 132 g (60 mm) |
| Material | aluminum 6061 |
| Angle | +/- 17° |
| Stem neck height | 40 mm |
| product ID | 22954 |
Hello, the product description states that more sizes are available. So I want to ask, is it possible to order a different stem size than 90 mm?
Automatically translated
Dobrý deň,
Dostupný je už len v dĺžke 90 mm.
Aka je vyska predstavca pri 80mm? Myslim tu cast predstavca, ktora sa nasuva na krk vidle. Pytam sa preto, lebo mam uz zrezany krk vidle. Dakujem
Vyska nasadenia na krk vidlice je 40mm mam ten predstavec na bicykli
Good, if I order a 100mm, I put it on and find that it doesn't fit me very well, so can it be changed without problems? I'll be careful not to screw him up at all, thank you
Automatically translated
Zdravim, ano. Navod najdete tu - https://www.mtbiker.sk/shop/informacie/vsetko-o-nakupe.html
Pozdravujem, prosím Vás, o koľko cm mi tento 80 mm predstavec zdvihne riadidlá oproti 80mm predstavcu +/-7 KLS active xc? Ďakujem.
Dobry den,
presna hodnota zalezi samozrejme aj od hlavoveho uhla, avsak nahrubo to bude pri prechode zo 7 stupnoveho predstavca na 17-stupnovy cca. 11-12 mm.
down force means turned down. It is not written anywhere, only + 17, I would like to turn it down, will that be a problem?
Nebude, ja ho tiez vozim ako -17
Ale može byť otočený aj smerom hore? Podľa obrázku a nápisoch na ňom to vyzerá skôr pre použite smerom dolu. Lebo u iných som čítal napr. +/- 6° ak sa dali otočiť tak aj tak.
Dobrý deň,
predstavec môže byť otočený aj nahor.
Zdravím, dali by sa zistiť niekde aj hmotnosti pre konkrétne dĺžky? Alebo aspoň pre 80mm , vďaka!
Ahoj, kontaktoval som dodavatela tak uvidime.
Ahoj, zial nemaju ich fyzicky skladom takze to nie je mozne odvazit.
len doplním , že 60mm váži 132g
Can you tell me what the spacing of the top screws is? I mean those who hold the handlebars.
well thank you
Dobrý deň,
premerali sme pre Vás rozteč horných skrutiek a vyšlo to na 2,5cm Prajem príjemný zvyšok dňa!
dobry den. prosim vas na aky priemer stlpika je tento predstavec ?
dakujem
Ahoj. Môžem použiť hliníkový predstavec na karbónové riaditka?
Dobrý deň,
Áno nie je problém pokiaľ dodržíte moment uťahovania uvedený na riadítkach.
Dobry den.Da sa zohnat aj 100 mm?
Dobrý deň,
100 mm je nedostupný.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

70mm weighs 134g (+/- 2g) Great workmanship, matte logos, works well, doesn't twist.
Automatically translated90mm / 151g...good price, nice workmanship...no more to discuss.
Automatically translatedWith these representatives, I adjusted the height of the rides as I needed.
Automatically translatedStem mounted, quality workmanship. I am satisfied.
Automatically translatedI needed to adjust my posture, it helped. Solid workmanship.
Automatically translatedI am still satisfied — the stem meets my requirements
Automatically translatedsatisfaction, everything fell into place
Automatically translatedThe 90mm weighs 152g. For the price, I think it's fine.
Automatically translatedBBB excellent quality for a favorable price
Automatically translatedGood quality probook.
Automatically translatedThe stem works
Automatically translatedExcellent for xc bike
Automatically translatedexcellent quality
Automatically translatedit works well
Automatically translatedNo problem
Automatically translatedIt has no faults.
Automatically translatedsatisfaction
Automatically translatedsatisfaction
Automatically translatedQuality
Automatically translated
Ok
Translate by GoogleShow the original