Shimano VIBE ALLOY stem, Ø-31.8 mm
Shimano VIBE ALLOY stem
Aluminum road stem with lightweight titanium bolts that reduce aerodynamic drag due to their placement.|
The stem is fully compatible with the Shimano Di2 system, whether with Dura-Ace or Ultegra groupsets.
|
|
Combined with VIBE handlebars, they allow for full integration and internal routing of brake and shift cables
|
|
Triangular stem profile improves weight-to-stiffness ratio
|
| Colour | black |
| Stem length | 80 mm, 90 mm, 100 mm, 110 mm, 120 mm, 130 mm |
| Handlebar diameter | 31.8 mm |
| Stem inclination (+/-) | 10° |
| Internal wiring | yes |
| Slope | -10° |
| Weight | from 120 g |
| product ID | 206369 |
•
Dobrý den,
prosím o informaci zda na tento představec lze nainstolovat i klasické víčko představce+klasická podložka z vrchu.
Výšku představce v upnutí vidlice a jaká je krycí výška dodávaného víčka představce.
Moment. mám představec výška 40mm 2x5mm podložka.
Děkuji za informaci.
•
Dobry den prajem,
osadenie klasickej koncovky (viecka) Vam potvrdit zial nevieme - vyrobca odporuca pouzivat vzdy len originalnu krytku, kvoli zachovaniu atypickeho aerodinamickeho profilu predstavca. Teoreticky pri pouziti dodatocnej podlozky nad predstavec samozrejme klasicke viecko problemom nebude, podlozka akurat nebude licovat s telom predstavca.
Vyska (stack) tohto predstavca je 36.5 mm.
V pripade akychkolvek dalsich otazok nas nevahajte kedykolvek kontaktovat.
Failure to follow these instructions may result in serious injury.
Replace the product and all related parts after an accident / impact.
When mounting on a 1" fork steerer, use the appropriate shim.
Never apply grease to the clamping surfaces.
Never use a tightening torque higher than that indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use extensions with a tightening torque higher than the recommended value of 5 Nm.
If you are unsure whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor, or visit our website www.pro-bikegear.com.
IMPORTANT!
Carefully read the manufacturer's instructions for all additional components (brake levers, shift levers, extensions, etc.).
Regularly check that the screws are tightened to the specified value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately crosswise.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (for adjustable stem only):
Adjust the angle.
Tighten to the torque value indicated on the stem.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Leatt Launch Control 4.0 handlebars Ø-35 mm/800 mm, blast black
from 81.99 €
RRP 89.99 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
There are currently no reviews