Shimano Deore FC-M4100-2 chainring, outer, 36T, 2x10
Shimano Deore FC-M4100-2 chainring
| Colour | black |
| Groupset | Shimano Deore |
| Number of teeth | 36 |
| Converter mounting | BCD 96 mm |
| For the number of gears | 2 x 10 |
| For gear combination | 36/26 |
| Weight | 119 g |
| product ID | 123433 |
Dobrý deň, prosím info či by som mohol použiť tento prevodník ako náhradu na moje kľuky https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/mtb/2-prevodnik/shimano-deore-fc-m615-2x10-kluky-38-24z-p5358.html?itm_medium=forum prípadne akú náhradu použiť?
To že má o dva zuby menej je pre mňa len výhoda. Vďaka za info.
Dobry den,
zial nie, tento prevodnik sediet nebude, disponuje odlisnou roztecou skrutiek.
Vhodny je napr.: https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/prevodnik-shimano-fc-m615-m625-38z-p104092.html - zial aktualne uz nedostupny Problemom je pri tomto modely kluk okrem roztece, ktora je inak standardna, atypicke kovanie prevodnikov okolo otvorov na tieto upevnovacie skrutky :/ Vhodnu alternativu zial dostupnu nemame.
Dobrý deň
je možná kombinácia tohoto prevodníka s týmto 24T?
https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/shimano-fc-m6000-prevodnik-24-zubov-be-p87036.html
Kľuky mám FC-M6000, rozteč je 96mm
Ďakujem
Dobry den, je to mozne, avsak prevodnik ma nabehove hrany dizajnovane pre kombinaciu s 26T malym prevodnikom - radenie tak moze byt pomalsie a menej presne.
Good day. Not sure - will this derailleur fit Sram guys 2x10, 49CL, 104BCD? I currently have Trutativ there and it is twice as expensive.
Thank you for your reply.
Dobry den prajem,
zial nie, tento prevodnik disponuje roztecou skrutiek 96mm BCD - podla Vasho popisu vsak potrebujete prevodnik s rozmerom 104mm BCD.
Pre 2x10 systemy to je s danym rozmerom potom jedine uz tento prevodnik od SRAMu: https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/sram-mtb-prevodnik-36t-104-mm.html.
Hello, can I use this converter also for the 11-speed system? If you don't have something that fits the 11-speed?
now I have 36z and the pitch is 96mm and 2x11
Dobry den,
zial nie, 11-rychlostna retaz bude pre tento prevodnik priuzka, nebude dosadat spravne na jeho zuby.
Ake mate kluky? Resp. jedna sa o symetricky alebo asymetricky rozmer 96mm BCD?
Hello, will the converter also fit Shimano Deore FC M6000 cranks? Or do you have a compatible 36z converter? I see only 26z available so far.
Automatically translated
Dobrý deň,
áno, prevodník disponuje rovnakým rozmerom 96 mm BCD, bude Vám sedieť aj na kľuky FC-M6000.
Dobrý deň,
vďaka za upozornenie - jedná sa samozrejme o rozteč 96 mm BCD.
WARNING
For installation, adjustment and replacement information about products not found in the user's manual, consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, physical damage to equipment and the surrounding area. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to equipment and the surrounding area.
WARNING:
Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
Before riding your bicycle, check that the crank arms are not cracked. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful not to get parts of your clothing caught in the chain while riding. Otherwise, you may fall off the bicycle.
CAUTION:
Be careful not to touch the teeth of the sprockets. There is a risk of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

I have it as a spare, the original one is bothering me on the cranks and it still works.
Automatically translated
originál má parádnu výdrž a len tak ho niečo nezničí, super
Translate by GoogleShow the original
Je to originál diel cena je ok
Translate by GoogleShow the originalJust good for the price.
Automatically translated