Vision MMETRON30 SL RB CH-TL SH11 V19 28" wheelset, rim, tire, QR, Shimano HG
The Vision Metron 30 SL Clincher wheels are based on 30mm high aerodynamic casing tubeless rims made of UD carbon with an internal width of 19mm and a special treatment of the braking surface, thanks to which the braking properties have been significantly improved in both dry and wet conditions.
The specific "U" profile of the rims was developed based on extensive CFD analyzes and tested in a wind tunnel. It guarantees excellent controllability and stiffness of the wheels under any conditions, especially when driving in crosswinds.
The wheels are mounted on Vision hubs of the second generation equipped with PRA (Preload Reduction Assembly) technology and high-quality bearings to minimize friction and maximize energy transfer efficiency on the 17mm inner axle.
The rear hub has undergone significant changes, while the new hub body has a 6mm increased distance between the flanges, a 12mm higher flange on the cassette side, which results in improved triangulation and significantly higher stiffness of the rear wheel.
It contains 2 pieces of 6903ACB (Angular Contact Bearings) with angular contact, which have raceways between the inner and outer ring offset in the direction of the bearing axis. High running accuracy is ensured thanks to the optimized internal construction, which enables the capture of simultaneously acting radial and axial loads.
Changes also come in the area of the nut, which has a 5mm greater distance between the bearings and wider latches.
The front wheel contains a radial braid consisting of 16 wires.
The rear wheel contains 21 wires braided in a ratio of 2:1 - 14 wires crossed 3 times from the right side of the cassette + 7 radial wires from the left side.
The dural nut is compatible with FSA, Shimano and Sram 9/10/11Speed road cassettes.
The wheels come with SwissStop brake blocks, a transport bag and Vision QR-93 quick-release axles.
Weight 1330g.
The minimum recommended tire width is 25mm.
The maximum recommended tire pressure is 8.5 Bar (125 PSI).
Material | carbon fiber |
Location | Set |
product ID | 223670 |

There are currently no reviews