Shimano HB-TC500 front hub, CenterLock, 32 holes, 110x15 mm
Sturdy and lightweight front hub with industrial bearings for reliable performance. Easy installation of the disc brake rotor on Center Lock. 15mm E-Thru thru-axle. Hub width: OLD - 110mm. Bearings: 17x 30x7mm.
Type: MTB, Total package weight: 270g, 32 holes, Front, Black, Mounting method: 15mm thru-axle, Center Lock, Material: Aluminum/Steel
| Colour | black |
| Location | Front |
| Axle type | fixed "boost" |
| Nut | none |
| Brake disc installation | Center Lock (CL) |
| product ID | 243922 |
WARNING
Information on the installation, adjustment, and replacement of products not found in the user's manual is available at the place of purchase or from the distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, thoroughly read this "user's manual" before use, follow it for proper use, and store it for future reference.
The following instructions must always be observed to prevent personal injury and physical damage to equipment and surroundings. Instructions are classified according to the degree of danger or damage that may occur in case of improper use of the product.
DANGER - Failure to follow instructions will result in death or serious injury.
WARNING - Failure to follow instructions could result in death or serious injury.
CAUTION - Failure to follow instructions could result in personal injury or physical damage to the equipment and surroundings.
WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and suffer serious injury.
- Before riding the bicycle, check that the wheels are securely fastened. Improper use of the axle quick release lever may cause the wheel to fall off, etc., and may lead to serious injury due to a fall or collision.
- Before riding the bicycle, you should thoroughly inspect the hubs and ensure there are no cracks on the axles; if you find any unusual conditions, DO NOT USE the bicycle. This front hub is designed for downhill and freeride cycling. However, depending on riding conditions, cracks may form on the hub axle, which may result in axle failure. This can lead to an accident that could result in serious injury or even death.
- This hub can only be used in combination with a special front fork and E-THRU. If used in combination with any other front fork or hub axle, the wheel may detach from the bicycle during riding, resulting in serious injuries.
- When mounting the front wheel to the front suspension fork, always follow the instructions in the front suspension fork manual. The securing method, as well as the tightening torque of the front wheel, vary depending on the type of front suspension fork used. If you do not follow the instructions, the front wheel may fall out, resulting in serious injury.
- Check that the axle quick release lever does not interfere with the disc brake rotor even when fully engaged. If the axle quick release lever is on the side of the disc brake rotor, it may interfere with the disc brake rotor, which is dangerous. If the axle quick release lever interferes with the disc brake rotor, stop using it immediately and contact the place of purchase or a distributor.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Co sa tyka cena/kvalita, tak jednoznacna spokojnost, pokial nie ste nahanaci gramov...
Translate by GoogleShow the original
Good hub , recommend.
Translate by GoogleShow the original