Novatec B2 type hub, Shimano HG, steel, OEM
Sale Novatec A/A2 ABG freehub, 3-latch, Shimano HG11, aluminum, OEM
43.99 €
RRP 45.99 €
Clearance -15% Novatec freehub D type, Shimano HG10, aluminum, OEM
39.99 €
-15%
RRP 47.99 €
Steel freehub B2 type (B427), Shimano HG11, 4-pawls, for D882SB, D772SB, D792SB, OEM
Cassette type: Shimano HG
Compatibility: B2
Material: steel
| For wheels | D882SB, D772SB, D792SB |
| Compatibility | Shimano HG |
| Material | steel |
| product ID | 292256 |
•
Hello.
Such a thing: I ride RAPTOR BOMBER QR 10x135 hubs (which are no longer available anywhere).
https://www.gravity-shop.sk/zadne-qr-10x135/naboj-raptor-bomber-qr-thru-axle-32d-10x135-cerveny/
The hubs are fitted with Novatec nuts - compatibility B (I'm not sure if it's B1 or B2), they are 3-latch with a 15mm inner hollow axle (that's also the inner diameter of the bearings in the nut and hub). Since installing the hubs I've been riding
11s - SHIMANO SLX CS M7000 cassettes. So far, no problems. During the last service (I was changing worn sprockets) I 'managed' to blow off the beginning of the thread in the nut. I proceeded as I always do when changing the cassette, or when exposing the hub with the nut to replace the bearings. So far, this operation has gone without problems.
For now, I'm stuck with the nut from the old cartridge, which is oddly 0.5mm thicker than the nut from the current cartridge - we'll see how long it lasts...
I want to ask if I could order and use this nut, even though it has 4 pawls, or will I also need to replace the internal gearing in the hub, or is it only left to convert the drive from 2x11 to 2x10, thus obtaining more threads and thus a secure securing of the 10s cassette to the hub. OR - does the market offer a thicker nut (more threads) than the original SHIMANO, which is of course compatible and will fit, or would it be a solution to 'change' to SUNRISE cassettes?
I will be eagerly awaiting a response/advice from someone knowledgeable.
Thank you.
•
Dobry den,
zial k spominanemu naboju sa mi nepodarilo dohladat blizsiu specifikaciu, resp. technicke rozkresy, tak neviem poradit s absolutnou istotou. Kazdopadne ak vyrobca udava kompatibilitu s orechmi Novatec typu B, tak by orech mohol sadnut.
Mozete zmerat prosim vnutorne prachovkove ukoncenie na oske? B1 orechy su vhodne pre osky s 18.8 mm ukoncenim, B2 potom pre uzsie 17.2 mm ukoncenie.
•
Veľmi pekne ďakujem za ozaj promptnú odpoveď.
Zameral som teda šublérou vnútorný priemer prachový a čítal som to ako
18.2 mm ... Takže?
•
Dobry den, takto ste merali, ano?
https://novatecwheels.eu/wp-content/uploads/2025/10/download-4.jpeg
•
Zdravím vás.
Veľmi pekne ďakujem, že sa mi stále venujete. Hneď som to bežal do garáže premerať a takto merané, to na šublére ukazuje nekompromisne 17,2mm.
Je teda toto kľúčový parameter, podľa ktorého vybereme orech?
A druhá vec - môj orech má 3 západky.
Toto zrejme zase nekompromisne viaže voľbu vnútorného ozubenia orechu (v mojom prípade je to 27 zubov) - matika nepustí...
•
Dobry vecer, ano, pokial ma naboj rozhranie pre Novatec orechy, a sedi teda aj priemer osky - tak tipujem, ze orech naozaj sadne. Pocet zapadiek by v takomto pripade problemom byt nemal.
Ak by predsalen po objednani orech z akehokolvek dovodu nesadol, tak ho nie je problem vratit - https://www.mtbiker.sk/shop/informacie/vsetko-o-nakupe.html#vratenie-a-reklamacie.
•
Dobrý deň, chcem sa spýtať. Kupil som karbonove kolesa so 4zapadkovým orechom Shimano 10-kolo ale nesedi mi tam povodna kazeta Shimano 105 CS-R7000, respektive sedi ale nechyta zavit. Je tento orech realna nahrada aby to fungovalo (náboj Novatec D412CD) . Ci odporucate iný, napr. Novatec B2 ABG orech, 4-západkový, Shimano HG11, hliník, OEM ?? Alebo existuje ina?? Slebo je jednoduchsie vymenit kazetu??
•
Dobry den,
pokial za kazetou nemate umiestneny spacer (podlozku) a aj tak nesedi, tak jedine zakupit novy HG11 orech standardu B2.
•
Dobrý den, má tento ořech i ložiska, nebo jsou potřeba dodatečně objednat?
A bude pasovat na toto kolo?
https://www.koloshop.cz/force-team-sp-karbon-disc-silnicni-vypletene-kolo-zadni-12x142-mm-50-mm-orech-shimano-hg11/53363
Děkuji
•
Dobrý deň, orech bude sedieť, obsahuje aj ložiská, stačí ho nahodiť.
•
Szia, nyugodtan tudom ajánlani, ha nem okoz gondot,hogy acél kazettás de amúgy minden stimmel. Jó bicózást 🚵♂️
•
Je tento orech kompatibilný s nábojom novatec d702sb cl?
•
Dobry den, ano, podla specifikacie Novatec vyuzival tento orech standard orechov B2, mal by teda sediet.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Clearance -12% Novatec JETFLY-DISC-CL-C 28" wheel set, disc, thru axle, Shimano HG
439 €
-12%
RRP 499 €
Clearance -23% Novatec J-HOOK, DB-2.0/1.5/2.0 14G W/lockt. PSRTB2015 (LASER) pointed, silver
0.99 €
-23%
RRP 1.29 €
Sale -38% FORCE spoke, Ø - 2 mm, stainless steel, black
from 0.49 €
-38%
RRP 0.79 €
Sale -30% microSHIFT XLE H-SERIES CS-H100 cassette, 10-speed
from 20.99 €
-30%
RRP 31.99 €
savings SRAM PG-1210/1230 spare casette sprockets, 11T/13T/15T
16.99 €
savings
RRP 33.99 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
Teljes mértékben megfelelő csak nem alu. Talán nehezebb de szerintem így jobban is bírja.
Translate by GoogleShow the original