Shimano SLX FH-M7110 rear hub, Center Lock, 32 holes, 12x148 mm
Shimano SLX M7110 rear hub
The SLX M7110 rear hub is suitable for disc brakes.|
Easy installation of the brake disc using the Center Lock nut
|
|
The Micro Spline freehub is only compatible with Shimano 12 speed cassettes
|
|
Continuous fixed axle E-Thru
|
| Colour | black |
| Location | Rear |
| Number of holes | 32 |
| Axle type | fixed "boost" |
| Nut | Shimano Micro Spline |
| Brake disc installation | Center Lock (CL) |
| Axle dimensions | 12 x 148 mm (Boost) |
| Mounting type | Fixed axis, Micro Spline, Center Lock |
| Material | aluminium |
| product ID | 87350 |
WARNING
For installation, adjustment and replacement information that is not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, physical damage to equipment and damage to the surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to equipment and surroundings.
WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. Incorrect use of the axle release lever may cause the wheel to fall off, etc., and may lead to serious injury due to a fall or collision.
- Read the user's manual for the E-THRU system lever carefully. Incorrect use of the E-THRU system lever may cause an accident such as the wheel falling off, which may lead to serious injury.
- Before riding the bicycle, you should thoroughly inspect the hubs and make sure that there are no cracks in the axles; if you find any unusual conditions, DO NOT use the bicycle. These rear hubs were not designed for downhill or freeride cycling. Depending on riding conditions, cracks may form in the hub axle, which may cause axle failure, which may lead to an accident resulting in serious injury or death.
- Check that the axle release lever does not interfere with the disc brake rotor even when fully engaged. If the axle release lever is on the disc brake rotor side, it may interfere with the disc brake rotor, which is dangerous. If the axle release lever interferes with the disc brake rotor, stop using it immediately and consult the place of purchase or a distributor.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
