Shimano SLX FH-M7010 rear hub, 32 holes, 12x142 mm, Center Lock
With a new lightweight bearing & axle system, the reliability and performance you trust with Shimano hubs keep rolling with the updated SLX rear hub.
SLX hubs have been redesigned to provide all-weather durability and reliable performance thanks to high quality sealings and angular contact bearings.
Product features
- Use: MTB
- Group: SLX
- Model: FH-M7010
- Spoke hole: 32h
- Freehub body: Shimano 8-/9-/10-speed, MTB 11-speed
- Brake type: Center Lock Disc
- P.C.D.: left 55mm / right 61mm
- Flange diameter: left 64mm / right 70mm
- Flange distance: 56.3mm
- Hub: Labyrinth and contact seals
- Type: Axle 12mm E-Thru
- Axle length: 12 x 142mm
Material
- Hub: Aluminum Anodized
- Axle: Steel
- Freehub body: Steel
Color
- black
Weight
- 357g
Scope of delivery
- 1 Shimano SLX Rear Hub FH-M7010 E-Thru 12mm Center Lock 32h
Technologies
Center Lock System
|
Polished ball tracks on cones and hubs for smooth operation and low rolling resistance
|
|
Classic hub design with cones for easy setup and service
|
|
Refined hub sealing for long life
|
| Colour | black |
| Location | Rear |
| Number of holes | 32 |
| Axle type | thru |
| Nut | Shimano HG |
| Brake disc installation | Center Lock (CL) |
| Axis | 12x142 |
| Interface | Center Lock |
| Freehub | Shimano HG |
| Weight | 360 g |
| product ID | 29938 |
WARNING
For installation, adjustment and replacement information that is not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to carefully read this "user's manual" before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following directions must be always followed in order to prevent personal injury, damage to equipment or damage to the surroundings. The directions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the directions will result in death or serious injury.
WARNING - Failure to follow the directions could result in death or serious injury.
CAUTION - Failure to follow the directions could cause personal injury, or physical damage to equipment and surroundings.
WARNING
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. If the quick release lever is not used correctly, the wheel may come off and so on, and a serious injury may result from falling or colliding.
- Be sure to read the user's manual for the E-THRU system lever carefully. If the E-THRU system lever is not used correctly, an accident may occur due to the wheel coming off, which could result in serious injury.
- Before riding the bicycle, you should thoroughly check the hubs and make sure that there are no cracks in the axles; if any unusual conditions are found, do NOT use the bicycle. These rear hubs have not been designed for downhill riding or freeriding. Depending on riding conditions, cracks can form on the hub axle, which can cause the axle to break, possibly leading to an accident with consequences of serious injury or death.
- Check that the quick release lever does not interfere with the disc brake rotor even when it is fully engaged. If the quick release lever is on the disc brake rotor side, it may interfere with the disc brake rotor, which is dangerous. If the quick release lever interferes with the disc brake rotor, stop using it immediately and consult the place of purchase or a distributor.
All the answers to questions about delivery, payment, security, returns, warranty and much else.


