Shimano Deore M6010 rear hub, Center Lock, 32 bolts, 12x142 mm
With a new lightweight bearing & axle system, the reliability and performance you trust with Shimano hubs keep rolling with the updated Deore rear hub.
Product features
- Use: MTB
- Group: DEORE
- Model: FH-M6010
- Spoke hole: (choose variant)
- Freehub body: Shimano 8-/9-/10-speed, MTB 11-speed
- Brake type: Center Lock Disc
- P.C.D.: left 44mm / right 45mm
- Flange diameter: left 52.8mm / right 53.8mm
- Flange distance: 57.4mm
- Hub: Labyrinth and contact seals
- Type: Axle 12mm E-Thru
- Axle length: 12 x 142mm
Material
- Hub: Aluminum Anodized
- Axle: Steel
- Freehub body: Steel
Color
- black
Scope of delivery
- 1 Shimano DEORE Rear Hub FH-M6010 12x142mm Center Lock
Technologies
Center Lock System
|
Designed for 12 mm E-THRU axles to increase wheel stiffness
|
|
Compatible with 11-speed cassettes with quick engagement freehub
|
|
Refined hub sealing for long life
|
|
Classic hub design with cones for easy setup and service
|
|
Polished ball tracks on cones and hubs for smooth operation and low rolling resistance
|
| Colour | black |
| Location | Rear |
| Number of holes | 32 |
| Axle type | thru |
| Nut | Shimano HG |
| Brake disc installation | Center Lock (CL) |
| Compatibility | Centerlock |
| Weight | 360 g |
| product ID | 51998 |
WARNING
For installation, adjustment and replacement information that is not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following directions should always be followed in order to prevent personal injury, damage to property or damage to the equipment and surroundings. The directions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER – Failure to follow the directions will result in death or serious injury.
WARNING – Failure to follow the directions could result in death or serious injury.
CAUTION – Failure to follow the directions could cause personal injury or physical damage to equipment and surroundings.
WARNING
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are fastened securely. If the axle release lever is not used properly, the wheel may come off and so on, and a serious accident could result from falling or colliding.
- Be sure to read the user's manual for the E-THRU system lever carefully. If the E-THRU system lever is not used correctly, the wheel may come off and an accident may result, possibly causing serious injury.
- Before riding the bicycle, you should check the hubs to be sure that there are no cracks in the axles; if any unusual conditions are found, do not use the bicycle. These rear hubs have not been designed for downhill riding or freeriding. Depending on riding conditions, cracks may form on the hub axle, which may cause the axle to break, possibly leading to an accident with serious injury or death.
- Check that the axle release lever does not interfere with the disc brake rotor even when it is fully engaged. If the axle release lever is on the disc brake rotor side, it may interfere with the disc brake rotor, which is dangerous. If the axle release lever interferes with the disc brake rotor, immediately stop using it and consult the place of purchase or a distributor.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
