OCÚN Thor 2Q work harness, green

OCÚN Thor 2Q work harness

Standardized attachment points:

• The front attachment point for fall arrest (EN 361:2002) is made of textile for increased user comfort, bears the safety marking "A". Tested at 15 kN head up, 10 kN head down
• The rear attachment point for fall arrest (EN 361:2002) is also textile for increased user comfort, bears the safety marking "A". Tested at 15 kN head up, 10 kN head down
• Central attachment point – a carefully designed D-ring made of lightweight alloy with an anodized finish, complying with EN 813:2008. Maximum rated load is 140 kg. Tested at 15 kN
• Positioning 1 – two attachment D-rings (EN 358:2018) located on the sides of the harness allow for pivoting into a working position or snapping into a parking position when not in use. This prevents them from unintentionally snagging on protruding objects
• Positioning 2 – another positioning attachment point (EN 358:2018), made of textile, is located in the center of the rear part of the harness's hip belt

Thorough material organization:

• Four material loops with reinforced braiding resistant to premature wear. Load capacity 10 kg
• Slots for material carabiners are located in front of and behind the positioning D-rings (2 x 5 slots in total)
• Additional material loops of any size can be easily created using cord, according to the instructions
• Special attachment points for a seat are located on the load axis. Load capacity 150 kg
• Carabiner slots on the leg loops serve for practical placement of ropes outside the main work area

Increased comfort and safety, easier handling:

• The patented Webee 3D hexagonal foam is very light, breathable and easy to wash, does not retain odor
• The shoulder straps have been designed to prevent unwanted chafing of the user's neck
• Additional movable shoulder padding increases comfort; for work with raised arms, it can be completely removed
• The back part provides better support to the body thanks to the added polyethylene layer
• The oval Osprey Screw carabiner makes putting on the harness easier
• The symmetrical delta connection system for the leg loops prevents discomfort in the groin area
• Wide primary straps ensure even distribution of pressure on the body surface, thus increasing the harness's comfort
• Narrow secondary straps, on the other hand, increase freedom of movement, reduce coverage and thus potential sweating
• A double buckle closing all adjustable straps makes tightening them easy even with gloves
• Steel self-locking buckles for easy strap length adjustment are protected against corrosion by a double protective layer (galvanizing, EDC)
• Reflective tape and contrasting trim increase visibility and thus user safety at the workplace