Fenix WF26R rechargeable lamp, black

The reliable Fenix ​​WF26R service lamp offers a luminous flux of up to 3,000 lumens and an afterglow of 450 meters. Power is provided by the included Li-ion battery type 21700 with a capacity of 5000 mAh, which is charged directly in the lamp using the enclosed cradle with a USB cable. The lamp simply snaps into the cradle when charging. The cradle is equipped with mounting holes, so it can be screwed to the wall, for example. The charging cable can be removed from the cradle and the lamp can be charged outside of it.
Fenix ​​WF26R has a total of six lighting modes (including strobe and SOS ) with a duration of up to 44 hours. It uses a dual tactical switch for control, which enables faster and more reliable control in crisis situations. For example, it can be easily switched directly to stroboscopic mode.
Excellent technical parameters, waterproof and impact-resistant design predetermine this lamp for use in harsh outdoor conditions. When performing the service, it will be appreciated above all by members of the armed forces, firefighters, rescuers and the mountain service. It will certainly be popular with security agencies and building security.
All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard. 

Fenix ​​WF26R lamp parameters

• A premium LED Luminus SFT-70 with a lifespan of 50,000 hours is used.
• Six power modes: 3000 lumens (total 2.7 hours, after 1 minute reduction to 1000 lm) -> 1000 lumens (2.8 hours) -> 350 lumens (8.9 hours) -> 30 lumens ( 44 hours ) - Strobe (3000 lumens) - SOS (100 lumens).
• Luminous flux and duration times are measured with the included Li-ion battery 21700 with a capacity of 5000 mAh.
• Electronics with digital constant power regulation and intelligent protection against overheating.
• Made of aircraft-hardened 6061-T6 aluminum, the light is shockproof when dropped from a height of 1.5 meters.
• Protection against accidentally inserting the battery upside down (reverse polarity).
• Durable surface - Type III hard anodized.
• Indication of the state of charge of the accumulator at the head of the lamp.
• Removable steel clip for attaching to a pocket or belt.
• Charging cradle with magnetic charging, the cradle is powered by a standard USB cable (the USB source is not included in the package).
• The cable can be removed and the lamp can be charged outside the cradle.
• The lamp has a memory and will always turn on in the last set mode (does not apply to flash modes).
• Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 4 hours)
• The reflector creates a well-focused light cone with an afterglow of 450 meters (52,888 cd).
• Lamp dimensions: 15.6 cm (length) x 4.04 cm (reflector diameter) x 2.66 cm (body diameter).
• Cradle dimensions: 7.67 x 4.37 x 4.7 cm.
• Weight 222 grams with battery.
• The flashlight comes with a Fenix ​​ARB-L21-5000 V2.0 battery, a charging cradle with a charging USB cable, a wrist strap and a spare o-ring.
• The WF26R is supplied without a case. The basic textile case can be purchased separately.
• As optional original accessories, it is possible to purchase the Fenix ​​ALD-05 strap for the use of the light on the helmet, the Fenix ​​bicycle holder, the USB adapter for the mains and the USB adapter for the car.

Using the Fenix ​​WF26R lamp

From the factory, there may be an insulating cap inside the lamp on the battery. Remove it from the battery before first use.
To turn on/off, press the larger tactical button located at the end of the light, for immediate activation, hold the button. When the light is on, you can switch between power modes at any time during operation by pressing the side toggle button. To switch to stroboscopic mode when the light is on, hold down the switch button for about 0.5 seconds, then press the button again to switch between stroboscope and SOS modes. Press and hold the toggle button to switch the light from off to strobe mode directly.

Charging - snap the lamp with the charging connector towards the inside of the cradle. Alternatively, if you have the charging cable removed from the cradle, attach the magnetic connector of the charging cable to the connector on the lamp. Plug the other end of the cable into the computer, or the USB adapter into the electrical network or into the car (adapters are not part of the package). The side indicator lights up red while charging. It lights up green when fully charged. Charging a fully discharged battery takes about 3 hours using a 3A source. The lamp cannot be used while charging.

Intelligent protection against overheating - due to the fact that the lamp reaches a huge output of 3000 lumens, there is an increase in temperature. If the temperature exceeds 60°C, the power will be automatically reduced. As soon as the temperature drops below 60°C, it is possible to use the highest power again.

Battery charge status indication - the lamp always indicates the battery charge status three seconds after switching on. Green indicates a sufficient state of charge (100% - 85%), green flashing 85% - 50%, steady red light 50% - 25% and flashing red critically discharged battery (25% - 1%). If the battery is discharged, the lamp will gradually automatically switch to lower power modes.
Warning of an exhausted battery - the lamp gradually automatically switches to the lowest mode and then the indicator keeps flashing red.

Warning

• Do not disassemble the sealed part in the lamp head yourself, this will void the warranty.
• Use only high-quality Li-ion batteries 21700 to avoid damage to the lamp, for example due to leakage of substances from the battery.
• If the protective rubber rings appear damaged after a long period of use, replace them.
• If the light flickers, does not switch to higher power or does not light up, it may be for one of the following reasons:
  
  • The battery is dead, charge it.
  • The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.
  • The end of the lamp is loose, tighten it.

Output: 3000lm
Max. durability: 44 hours
Afterlight: 450m
Number of modes: 6
Weight: 222g
Power supply: 1x 21700
Light source: Luminus SFT-70
Waterproof: IP68 (immersion 2 m)