Fenix ​​HT32 lamp

The Fenix ​​HT32 hunting light with white, red and green LEDs offers a top luminous flux of up to 2500 lumens in white light and an afterglow of up to 640 meters. The maximum output of the green light is 1400 lumens with an afterglow of 210 meters, and the maximum output of the red light is 400 lumens with an afterglow of 120 meters. Light-emitting diodes from the American manufacturer Luminus are installed in TIR optics, which create a well-focused light cone. It is powered by one Li-ion battery type 21700 with a capacity of 5000 mAh and a built-in charging USB-C connector (the battery is included in the package).

The multi-colored Fenix ​​HT32 LED lamp has a total of five functions of white light with a duration of up to 29 hours, including stroboscopic flashing and two functions of red and green light. There is a dual tactical switch in the back of the lamp, which allows for faster and more reliable control in crisis situations. For example, the stroboscopic mode can be immediately activated directly. Long gun mounts and AER-05 cable switch are compatible with the light. The Fenix ​​HT32 is a top light tool for professionals, hunters and everyone who will use the durability, high performance and color lighting options.

All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters of the Fenix ​​HT32 hunting light

• Premium white LED Luminus SFT-70, red LED SFT-20 RA and green LED SFT-20 CG with a lifespan of 50,000 hours are used.
• Nine lighting modes:
  
  • Five white light modes: 2500 lumens (1.8 hours) -> 1000 lumens (2.5 hours) -> 350 lumens (8 hours) -> 50 lumens (29 hours) -> Strobe 2500 lumens
  • Four color light modes: red light 400 lumens (3.25 hours) -> red light 150 lumens (4.8 hours) -> green light 1400 lumens (2.5 hours) -> green light 350 lumens (6 hours).
• Large TIR optics for a focused light cone with an afterglow of 640 meters (101,000 cd). The afterglow in red light is 120 meters and in green 210 meters.
• Electronics with digital power regulation, protection against reverse insertion of batteries and protection against too deep battery discharge.
• The included Li-ion battery 21700 5000 mAh with a built-in USB-C connector is used for power supply.
• Dimensions 16 cm (length) x 5.2 cm (head diameter) x 2.54 cm (body diameter).
• The lamp has a memory and will turn on in the last set mode, except for the strobe.
• The body of the lamp is made of aviation hardened aluminum, the head of the lamp is supplemented with a striking rim.
• Durable hard-to-scratch surface - Type III hard anodized.
• Impact-resistant from a fall from a height of 1 meter.
• Trapezoidal threads highly resistant to wear.
• Weight 185 grams (without battery) or 258 grams (including battery).
• Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters).
• Withstands recoil without problems when used on a weapon.
• Tactical switch at the end of the lamp (momentary on/off function).
• The lamp comes with an ARB-L21-5000U battery, USB-C charging cable, wrist strap, belt pouch, spare o-ring.
• The following accessories can be purchased: AER-05 cable switch, ALG-15 quick release rail mount, ALG-00 quick release rail mount, Fenix ​​ALG-16 M-LOK mount, Fenix ​​ALG-18 barrel mount, barrel mount, metal magnetic barrel mount, plastic magnetic barrel mount, light mount on optics, metal mount on optics, Fenix ​​ALD-05 strap for helmet light use.

The use

From the factory, there may be an insulating cap inside the battery. Remove it before first use.

To turn it on, press the main tactical button at the end of the light, for immediate activation, hold the button. You can switch between power modes at any time during operation by pressing the secondary toggle button.

Switching the light color - when the lamp is on, press and hold the switch button, the light color will be switched cyclically in the order white - red - green, when the desired color is reached, release the button. The lamp remembers the selected light color even after switching off.

The strobe is only activated from the off state by pressing and holding the toggle button.

Low battery warning - if the battery voltage drops below the set level, the lamp will reduce the brightness to a lower level until it reaches the lowest mode. After reaching the lowest power, the light will flash three times every 5 minutes to remind you to recharge or replace the battery.

Intelligent protection against overheating - if the temperature of the lamp exceeds 65 °C, the power will be automatically reduced. As soon as the temperature drops below 65 °C, it is possible to use the highest power again.

 Upozornenie

• Use only high-quality rechargeable Li-ion batteries type 21700 with protective electronics.
• Insert the batteries with the positive pole towards the lamp head.
• If the protective rubber rings appear damaged after a long period of use, replace them. The rings must also be lubricated to prevent rubber erosion. By following these rules, the lamp will be properly protected against water.
• If the light flickers, does not switch to higher power modes, or does not light up, it may be for one of the following reasons:
  
  • The battery is almost empty - charge it or replace it.
  • The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.
  • The back part of the lamp is loose, tighten it.

Aftersight: 640m
Max. duration: 29 hours
Output: 2500lm
Number of modes: 9
Weight: 258g
Power supply: 1x 21700
Light source: Luminus SFT-70
Waterproof: IP68 (immersion 2 m)