Fenix BC30R Front Light
Fenix BC30R front light
The second generation Fenix BC30R charging light brings a luminous flux of up to 1800 lumens (ANSI) and an afterglow of up to 161 meters. It is powered by an internal Li-ion battery with a capacity of 5,200 mAh / 3.7V, which is charged via a micro USB connector directly in the lamp. The light source is two modern Cree XM-L2 U2 diodes with a warmer shade of light (neutral white). The advantage of this shade of light is a more natural and contrasting presentation of colors in the field. The lamp uses the proven technology of double direction of light "Dual Distance Beam System". The main cone of light is created by specially designed optics and shines into the distance, while the secondary wide cone of rays completes the optical element, which is shaped in the upper part in such a way that the light directed upwards refracts down to the ground. This creates a cone that continuously illuminates the entire space in front of the bicycle - even in places that cannot be covered by ordinary bicycle lights.The remote cable switch has also been improved, now it is possible to turn the light on, off and switch between power modes. The new design of the handlebar mount is characterized by lower weight and faster assembly without the use of tools. The holder allows quick removal of the lamp, so it can also be used as a high-performance hand light. The holder can be used for all handlebars with a diameter of 22 to 35 millimeters.
|
Total of six power modes: BURST 1800 lumens (while pressed) -> 1000 lumens (2.6 hours) -> 400 lumens (7.3 hours) -> 150 lumens (16.15 hours) -> 50 lumens (36 hours ) -> warning flashing (150 lumens)
|
|
Runtimes are measured with internal rechargeable li-ion battery with capacity of 5,200 mAh / 3.7 V
|
|
Waterproof and dustproof according to the IP66 standard (spraying with strong streams of water from all directions)
|
|
Charging time approx. 5 hours with fully discharged battery, may vary depending on the power of used charger (recommends 1500 mA and more)
|
|
Specially shaped optics create light cone combining wide peripheral lighting with range of 161 meters (6480 cd)
|
|
Light is attached to holder using quick-release mechanism, which allows it to be taken down in an instant and just as quickly put back on safely
|
|
Rubberized design of the holder bracket ensures firm and safe attachment to the bicycle with simple and reliable adjustment of light's direction
|
|
Protection against overheating - if light heats up above safe limit, it will automatically switch to lower power level
|
|
Light has memory and will always turn on the last set mode (does not apply to flashing mode)
|
|
Light comes with remote cable switch (removable) that can be used to change modes and activate the strongest BURST mode
|
|
Light's body is made of aluminium alloy
|
|
Electronics with constant digital power regulation
|
|
Informational OLED display with indication of charge status and remaining lighting time for given mode
|
| Location | Front |
| Package contents | light with integrated battery, handlebar holder with spacers, remote switch, USB cable |
| Weight | 222 g |
| Light source | Cree XM-L2 |
| Waterproof | IP66 (heavy rain) |
| Power supply | Internal battery, USB charging |
| Max endurance | 36 hours |
| Reach | 161 m |
| Power | 1800 lm |
| Dimensions | 114mm x 505mm x 318mm |
| product ID | 51205 |
All the answers to questions about delivery, payment, security, returns, warranty and much else.


