Kellys E-Carson 70 28 ", model 2020
KELLYS e- Frame Tour Profile Aluminum alloy, semi-integrated battery, tapered HT, integrated kickstand mount
Power unit: SHIMANO STEPS E6100, 36V
Display: SHIMANO SC-E6100
Battery: SHIMANO BT-E8010, 504Wh / capacity 14Ah
Fork: SR SUNTOUR NCX-D LO Air, 63mm, air / Speed Lockout
Head composition: semi-integrated
Cranks: SHIMANO FC-E6100 (38T) - length 170mm
Gear: SHIMANO Deore SL-M6000-R Rapidfire Plus
Derailleur: SHIMANO Deore M6000 (direct mount)
Number of gears: 1x10
Cassette: SHIMANO CS-HG500-10 (11-42T)
Chain: KMC X10 (112 articles)
Brakes: SHIMANO MT400 Hydraulic Disc
Wheels: front 160mm / rear 160mm
Brake levers: SHIMANO BL-MT400
Hubs: SHIMANO TX505 Disc Center Lock (32 holes)
Rims: KLS Cartel Disc 622x21 (32 holes / riveted)
Tip: stainless steel black
Tires: SCHWALBE Energizer Plus, GreenGuard 47-622 (28x1.75) ADDIX E, ReflectiveLine
Stem: adjustable PROMAX a-head - diam 28.6mm / bar bore 31.8mm / length 105mm
Handlebars: KALLOY RiseBar - diam 31.8mm / width 640mm
Grips: KLS Wave 2Density ergonomic
Seatpost: sprung KALLOY - diam 30.9mm / length 350mm
Saddle: SELLE ROYAL Essenza Moderate
Pedals: NonSlip - alloy
Headlight: TRELOCK Veo 50
Rear light: TRELOCK Duo Flat
Fenders: alloy
Accessories: aluminum alloy carrier, adjustable stand, bell
Model year | 2020 |
Gears | 1x10 |
Groupset | Shimano Deore |
Material | aluminium |
Drive | Shimano STePS E6000 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 89546 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews