Giant FastRoad E + 2, model 2019
AluxX SL Aluminum frame, central motor, integrated battery
AluxX SL Aluminum fork, OverDrive stem
Giant Connect handlebars, straight handlebars with extensions
Giant Connect stem
Giant seat post, aluminum, 30.9 mm
Giant Contact Neutral saddle
Shifting Shimano Tiagra, gears 2x10
Shimano Tiagra derailleur
Shimano Tiagra derailleur
Brakes Shimano MT201, hydraulic, discs 160 mm
Brake levers Shimano MT201
Shimano Tiagra cassette, 11-32 teeth
Chain KMC E.10 Sport, especially for electric bicycles
Alloy cranks, gears 50/34 teeth
Giant GX28 Disc rims
Hubs Giant Tracker Sport Road
Stainless steel wires
Maxxis Re-Fuse MaxxShield tires, 700x32c, folding, tubeless
Accessories fast battery charger Giant EnergyPak 4A
Motor Giant SyncDrive Sport powered by YAMAHA, 80 nm, 250 W, support up to 350%
Sensors Giant PedalPlus 4-sensor technology
Giant RideControl EVO control unit with multifunctional LCD display, walk assist functions, US B connector
Battery Giant EnergyPak 400 Wh, 36 V, 11.3 Ah, Li-Ion
Gears | 2x10 |
Battery | 400 Wh |
product ID | 76202 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews