Mondraker Crafty Carbon R, 2020 model
Fork: Fox 36 29 Float FIT GRIP EVOL Performance, travel 160 mm
Head composition: Acros custom
Derailleur: SRAM GX Eagle X-Horizon Type 3, 1x12
Shifting: >: SRAM NX Eagle Trigger, 12 speeds
Brake levers: SRAM G2 RSC
Cranks and converters: Engine Bosch Performance Line G4 CX system w / Intube PowerTube 625 Wh Bosch battery, Kiox on-board computer. RaceFace Aeffect cranks length 165 mm, optimized for E-bikes, SRAM Eagle 34 tooth shifter
Handlebars: ONOFF Krypton 1.0, width 780mm
Stem: ONOFF Krypton FG, length 30 mm
Seat post : ONOFF Pija internal 1x lever, telescopic
Saddle: Fizik Antares R7
Front hub: DT Swiss Hybrid SPILINE 370S based, axle 15x110 mm
Rear hub: DT Swiss Hybrid SPILINE 370S based Pawl System, axle 12x148mm
Chain: SRAM NX Eagle, 12 speeds
Cassette: SRAM Eagle PG-1230, 11-50 teeth, 12 speeds
Spokes: Hybrid System, E-bike specific, SP spoke
Rims: DT Swiss Hybrid H1900 29 SPLINE, rim width 30mm, braided set
Tires: Maxxis Minion DHF 29, width 2.6", 3C, EXO+, TR, MAXX TERRA / Maxxis Minion DHR II 29, width 2.6", 3C, EXO+, TR, MAXX TERRA
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM GX, SRAM NX |
Material | carbon fiber |
Drive | Bosch Performance CX |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 106671 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews