Mondraker Chaser 29, model 2020, orange
New model Haibike ALLTRAIL 10 29 e-bike, high slate blue/blue/black
5,399.90 €
RRP 5,499 €
-24% Haibike AllMtn 7 29/27.5 e-bike, matt gloss green/caramel black
4,999 €
-24%
RRP 6,599 €
Fork: RockShox Recon RL Motion control 29, 150mm, DebonAir, tapered steerer tube, Boost 15x110mm axle, 44mm offset. Settings: compression adjustment at low-speed to lock, rebound, air preload
Damper: RockShox Deluxe Select R Debonair, 205x65mm. Settings: Low-speed rebound, air preload. Trunnion top mount, 25x10mm bottom bushings
Head assembly: Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°
Stem: Onoff Sulfur FG 30mm, 6061 forged alloy, 31.8mm barbore
Handlebars: OnOff Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 780mm, 9° backsweep, 5° upsweep, 31.8mm barbore
Grips: Onoff Twin, 1lock-on, 135mm
Seatpost : Onoff Pija dropper internal, diameter 31.6mm, S size: 337x100mm, M size 387x125mm, L/XL size: 425x150mm
Saddle: Mondraker e-MTB custom design
Front brake: SRAM Guide RE 4 piston, SRAM centerline rotor, resin pads
Rear brake: SRAM Guide RE 4 piston, SRAM centerline rotor, resin pads
Brake levers: SRAM Guide RE, alloy lever
Rims: MDK-HP1 29, 30mm internal width, tubeless ready, 32 spokes
Tip: CN round stainless steel
Front hub: MDK DC711 15x110mm, cup & cone ball bearings, IS 6 bolts Rear hub: MDK EHL148 12x148mm, sealed bearings, IS 6 bolts
Front tire: Maxxis Rekon 29x2.6 tubeless ready, Dual compound, EXO protection, 60TPI, folding bead
Rear tire: Maxxis Rekon 29x2.6 tubeless ready, Dual compound, EXO protection, 60TPI, folding bead
Cranks: Bosch Performance Line CX system Gen4, 625 Wh PowerTube battery, Purion on-board computer, RaceFace Aeffect ebike crankset, 165mm
Gears : SRAM X-Sync 2 Eagle 34T, narrow-wide, Bosch Gen4 DM
Chain: SRAM SX Eagle, 12s
Derailleur: SRAM SX, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1:1
Shifting: SRAM Trigger SX, 12s, X-Actuation 1:1, single click
Cassette: SRAM PG-1210 Eagle 11-50, 12s
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
29” wheels
The advantage is better terrain passability, better rolling and traction. However, they are heavier, which also applies to tires.
| Model year | 2020 |
| Gears | 1x12 |
| Groupset | SRAM SX |
| Material | aluminium |
| Drive | Bosch Performance CX |
| Battery | 500 Wh |
| Brakes | Hydraulic disc brakes |
| product ID | 106673 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Sale savings FORCE Revolt Carbon cycling shoes, black
from 139 €
savings
RRP 231 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews