Lapierre OVERVOLT XC 500i Bosch POWERTUBE 29 ", model 2018
Fork: ROCKSHOX RECON RL 29B 15x110 SOLO AIR 120mm travel, MAXLE STEALTH
Shock absorber: ROCKSHOX DELUXE R METRIC 190x40mm MM TUNE
Derailleur: SRAM NX 11s
Cranks: LAPIERRE SAC39E ISIS 14T 3mm 170mm + ANTI CHAIN SUCK
Engine / Battery: BOSCH CX POWERTUBE 500Wh PURION DISPLAY
Cassette: SUNRACE MS8 11s 11-46T
Chain: SRAM PC1110 POWERLOCK
Brakes: SHIMANO M425
Wheels: SHIMANO SMRT66 203mm / 180mm
Gearing: SRAM NX 11s
Head composition: FSA Orbit 1.5 ZS NO.57SC
Handlebars: LAPIERRE 6061DB W: 760mm W: 15mm: 31.8mm
Grips: VELO VLG975 LOCK ON
Stem: LAPIERRE ASM05 0: 31.8mm L: 35mm (S), 45mm
Seatpost: LAPIERRE SP37.1: 31.6mm L: 350mm
Saddle: LAPIERRE by VELO
Front hub: FORMULA DC711 15x110 BOOST 32H
Rear hub: FORMULA DHT-148S 12x148 BOOST SHIMANO DRIVER 32H
Rims: LAPIERRE TRYP 25 32H 622-25c
Tires: MAXXIS 29X2.40 ARDENT 60TPI Foldable EXO protection TR White Logo
Pedals: Pedals: VP-917
Accessories: SPOKE MAGNET HOLDER
Model year | 2018 |
Gears | 1x11 |
Groupset | SRAM NX |
Material | aluminium |
Drive | Bosch Performance CX |
Battery | 500 Wh |
product ID | 49885 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews