Lapierre E-Zest AM LTD ULTIMATE gray, model 2019
Year: 2019
Wheel size: 27.5"
Type: full
Frame: NEW eZesty AM FULL CARBON ULTIMATE 150 mm travel, BOOST, METRIC, THRU AXLE
Fork: NEW FOX 36 FLOAT FACTORY Kashima BOOST 15x110 160mm
Derailleur: SRAM X01 CARBON EAGLE 12 spd
Cranks: NEW FSA CARBON e-Bike ISIS 170 mm w / SRAM XSYNC II 32T RING
Cassette: NEW SRAM PG1230 EAGLE 11-50 12SPD
Chain: NEW SRAM NX EAGLE 12SPD
Brakes: SRAM GUIDE RE
Shifting: SRAM GX EAGLE Matchmaker SINGLE CLICK 12SPD
Head composition: FSA ORBIT ZERO STACK
Handlebars: RACE FACE SIXC CARBON 20 mmx785 mm
Grips: LP LOCK-ON
Stem: NEW LP FULL CNC 0° 35 mm (M, L), 45 mm (XL)
Seat post : LP CARBON DROPPER 125 (M), 150 (L, XL)
Saddle: NEW Lapierre CrMo by Velo
Rims: LP EAM + CARBON 584x33 BOOST, TUBELESS READY
Tyres: NEW MAXXIS HIGH ROLLER II WIDE TRAIL 27.5x2.5 3C MAXXTERRA EXO FRONT and REAR
Pedals: NW 91K
Accessories: TUBELESS TAPE + VALVES
Wheels: SRAM CENTERLINE 2 00 mm / 200 mm
Damper: FOX FLOAT DPS FACTORY Kashima LV EVOL TRUNNION
Front stroke: 160 mm
Filter strokes: 160 - 170 mm
Engine: NEW fazua EVATION 1.0 DRIVE PACK + 250 Wh BATTERY PACK
Model year | 2019 |
Gears | 1x12 |
Material | carbon fiber |
Battery | 400 Wh |
Brakes | Hydraulic disc brakes |
product ID | 64169 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews