Corratec E-Power RS 150 Performance 45 2018
E-bike with a built-in battery, thanks to which the e-bike is perfect for the trail, as well as in the hills. The bike can be fitted with 29" and 27.5" wheels.
Frame: Corratec E-Power RS 150 29 CX Material: Alloy 6061 PG
Fork: Rockshox Pike RC 29/27 Boost Solo Air Suspension travel: 150mm Steer tube: 1 1/8" - 1.5" tapered brake mounts: Disc PM6 direct mount 160 mm
Rear shock absorber: Rockshox SUPER DELUXE RC3 Suspension travel: 150mm
Brakes: Magura MT5front Brake disc size: 180 mm
Stem: ZZYZX 6 Series 3D Forged Material: Alloy
Handlebars: ZZYZX 6 Series XC 15 740mm Material: Alloy
Seat: Corratec Black Cromo Rail Material: white/green/gray
Seatpost: Rockshox Reverb Stealth 125 Outer diameter: 31.6mm Material: Alloy
Gearbox: Lasco Bosch Crank 20T Number of chainrings; Ratio: 1s; 20
Cassette: Shimano SLX 11s Number of pinions; Ratio: 11s; 11-13-15-17-19-21-24-28-32-37-46
Derailleur: Shimano XT 11s
Shifting: Shimano XT
Rims: Mach1 KlixxRim outer diameter:29.00zollNumber of spokes:32Material: Alloy
Tires: Continental X King 2.4Inside diameter:29.00zollWidth:60mmType of tires:clincher with tubes
Converter gears: 1s; 20
Cassette transmissions: 11s; 11-13-15-17-19-21-24-28-32-37-46
Fork stroke: 150 mm
Rear shock absorber stroke: 150 mm
Brake disc size: 180 mm front180 mm rear
Engine: BOSCH Performance Speed Max speed: 45km/h Power: 350watt Torque: 63Nm J
Battery: BOSCH Power Tube 500 W/h Energy: 500wh
Model year | 2018 |
Gears | 1x11 |
Groupset | Shimano XT, Shimano SLX |
Battery | 500 Wh |
product ID | 52392 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews