Pinarello ROKH HYBRID 7.7
Pinarello ROKH Hybrid 7.7 is an electric bike with Bosch Performance CX drive, powered by a 500 Wh battery. The frame is made of Al alloy 6061 T6, and the finish is decorated with an elegant metal inscription Pinarello. The bike is mounted on a reliable 11-speed mechanical Shimano XT, including gears and hydraulic brakes. The wheels are DT Swiss M1700, fitted with Schwalbe Nobby Nic 27.5+ tires.
Engine: Bosch Performance CX
Battery: 500Wh
Sport / use: cycling
Year: 2018
Model range: ROKH HYBRID
Frame: pinarello rokh hybrid 7.7 to 6061 t6
Fork: rock shock revelation
Wheels: dt swiss m1700
Set: Shimano XT M8000
Derailleur: shimano xt m8000 11s
Cranks: bosch performance cx
Brakes: Shimano XT M8000
Handlebars: controltech al 700 mm
Stem: controltech al 100 mm
Seatpost: controltech al 31.6 mm
Saddle: selle italia sl
Tires / Galusky: schwalbe nobby nic 27,5+
Gears | 1x11 |
Groupset | Shimano XT |
Material | aluminium |
Drive | Bosch Performance CX |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 63002 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews