Kellys Tygon 70 27.5"
frame size S / M / L
motor SHIMANO STEPS E8000
shift unit SHIMANO SW-E7000 switch for motor assis
cycle computer SHIMANO SC-E 7000
battery KELLYS Re-Charge Li-ion internal 36V /630Wh / capacity 17.5Ah
fork ROCK SHOX Revelation RC (27.5) Boost, 120mm, DebonAir / Motion Control RC / Maxle Stealth 15mm thru axle
main composition FSA 1.5 integrated
cranks SHIMANO FC-E8000 (34) - length 170mm
shifting SHIMANO SLX M7000 Rapidfire Plus / SW-E7000 switch for motor assist
shifter SHIMANO Deore XT M8000 (direct mount)
number of gears 11
cassette pinion SHIMANO CS-M7000-11 (11-46)
chain KMC X11e (116 links)
brakes SHIMANO SLX M7000 Hydraulic Disc
brake discs front 180mm / rear 180mm
brake levers SHIMANO SLX BL-M7000
hubs NOVATEC Disc (15x110mm / 12x148mm / 32 holes)
fixed axle front ROCK SHOX Maxle Stealth 15x110mm / rear NOVATEC 12x148mm
rims KLS Valor 2 Disc 584x27 (32 holes)
string stainless steel black
tires SCHWALBE Hans Dampf 65-584 (27.5x2.60) SnakeSkin, Tubeless Easy, ADDIX Speedgrip, folding
stem KLS Active - diam 28.6mm / bar bore 31.8mm / 7° / length 60mm (S - M), 70mm (L)
handlebars KLS Active RiseBar - diam 31.8mm / rise 15mm / width 720mm (S - L)
KLS Poison grips
seatpost KS - Remote Telescopic - diam 30.9mm / length 485mm, stroke 150mm
KLS Avenger saddle
KLS Master pedals
weight kg 22.05 (M)
Model year | 2020 |
Gears | 1x11 |
Material | carbon fiber |
Drive | Shimano STePS E8000 |
Battery | 756 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
product ID | 69361 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews