Ghost Ebike LECTOR S6.7+ LC Titanium Gray / Riot Red / Star White, model 2020
The Ghost Hybride Lector certainly does not deny its racing genes. It is a great choice for all those who love uniqueness, elegance and true off-road adventure. And of course for those who do not disdain electrical help.
The Hybride Lector is a solid MTB electric bike with a carbon frame and a powerful Shimano central motor. You have 12 gears, a high-quality RockShox air fork with 120 mm travel, a 29-inch front wheel and a 27.5+" rear wheel. All bowdens are routed inside the frame.
Wheel size: 29 + 27.5 +
Material: Carbon
Year: 2020
Frame: Hybride Lector LC
Fork: RockShox Pike Select + RC 120 mm
Derailleur: SRAM X01 Eagle 12-S
Cranks: Samox 34T
Cassette: SRAM PG-1230 11-50
Chain: SRAM NX Eagle
Brakes: SRAM G2 RSC 4/4 Piston 200/180 mm Disc
Handlebars: Ground Fiftyone Race 760 mm Rise 15 mm Dia. 31.8 mm
Grips: Ergon GE1
Stem: Ground Fiftyone Dia. 31.8 mm
Saddle: Ergon SM E-Mountain
Pedals: VSE 527
Discs: SRAM Centerline 200/180 mm
Front stroke: 120 mm
Motor: Shimano DU-E8000
Footer : FRHG0021
Front tire: Maxxis Ardent 3C MaxxTerra Exo 29x2 .35
Rear tire: Maxxis REKON 3C MaxxTerra Exo 27.5x2.6
Battery: Shimano BT-E8010 504 Wh
Display: Shimano SC-E8000
Modified color variant - according to the B2B model: Titanium Gray / Riot Red / Star White
Number of gears: 12
Chain guide: e * thirteen e-spec Plus
Front braided wheels: Rodi Wheelset 30 mm 15x110 mm
Rear braided wheels: Rodi Wheelset 30 mm 12x148 mm
Charger: Shimano EC-E6002
Maximum wheel load capacity: 140
model year: 2020
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM X01, SRAM NX |
Material | carbon fiber |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 88115 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews