DEMA Ergo 29 electric bicycle, black/grey M
Frame: ERGO MTB Alloy
Fork: SR SUNTOUR XCM34 BOOST 15x110, TRAVEL 120mm
Derailleur: SRAM SX EAGLE 12SPEED
Shifting: SRAM SX EAGLE SINGLE CLICK TRIGGER
Brakes: CLARKS HYDRAULIC DISC
Cranks: BAFANG ISIS (Bafang standard), 32T NW
Cassette: SRAM PG1210 EAGLE 11-50T 12SPEED
Chain: 12speed
Head composition: EXTEND H868P, 1 1/8" - 1.5" TAPPERED
Stem: EXTEND D6122, 8°, 31.8mm, 60mm
Handlebars: EXTEND A6074BT 700mm, rise 19mm, backsweep 9°
Grips: EXTEND ABSORBIC Silicone 130mm
Seatpost: EXTEND Alloy 31.6x350mm
Saddle: SELLLE ITALIA X
Hubs: EXTEND, 32H, BOOST 15x110mm / 12X148mm, CL, cartridge bearings
Rims: WTB ST i27 TCS 2.0 29"
Tires: EXTEND GRIZZLY ALL BLACK 29x2.25"
Pedals: Extend Alloy Black
Gears: 1x12
Motor: BAFANG M420 MM G332 80Nm, 36V, 250W, pedal (speed & torque) sensor CANBUS
Battery: ZZ420, LG MJ1, config. 10S5P, 36V, 17.5Ah, Smart BMS
Display: BAFANG DP C18.CAN 36V, LCD color screen
Sex | Men, Unisex |
Model year | 2024 |
Gears | 1x12 |
Colour | black, silver |
Material | aluminium |
Drive | Bafang |
Battery | 630 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Telescopic seat post | no |
product ID | 320369 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
