Kellys E Carson 30 XL Gray 28 "720Wh, 2021 model
Kellys E Carson 28 electric bike
Suitable for occasional recreational or weekend trips outside the city. You can ride on cycle paths and paved roads during your weekend activities. If you ride frequently, expect more regular basic servicing.
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Coil fork
Provides adequate comfort and is usually installed on bicycles for recreational and less demanding riding. The disadvantage is its relatively heavy weight.
28” wheels
Often marked as 700c. They usually have a narrower profile, lower weight and high stiffness. They are the standard, especially for road (CX, gravel), trekking, city and cross-country bikes.
| Drive |
Shimano STePS E5000, 36 V
|
| Battery |
KELLYS Re-Charge V10 Li-ion internal removable 720 Wh / capacity 20 Ah, powered by BMZ
|
| Cycling computer |
Shimano SC-E5000 cycle computer with assist switch
|
| Frame |
KELLYS E-CARSON R series - advanced robotic welded 6-series aluminum alloy, integrated removable battery, 1.5" tapered HT / Made in EU
|
| Fork |
SR Suntour NVX30 UFO (29), 100 mm, coil spring
|
| Shifting |
Shimano Altus SL-M2000 Rapidfire Plus
|
| Derailleur |
Shimano Altus M2000 (direct mount)
|
| Cassette |
Shimano CS-HG201-9 (11-36T)
|
| Chain |
KMC e9S (118 articles)
|
| Cranks |
SHIMANO E5000 (38T) - length 175 mm
|
| Brakes |
Shimano MT200 Hydraulic Disc
|
| Brake levers |
Shimano BL-MT200
|
| Brake discs |
front 160 mm / rear 160 mm
|
| Rims |
KLS Draft Disc 622x21 (32 holes)
|
| Hubs |
Shimano TX505 Disc Center Lock (32 holes)
|
| Spokes |
stainless steel black
|
| Tires |
IMPAC Bigpac 55-622 (28x2.15) TwinSkin, ReflectiveLine
|
| Seat post |
KLS Active - diam 30.9 mm / length 350 mm
|
| Saddle |
KLS Sentinel 2
|
| Stem |
adjustable PROMAX a-head - diam 28.6 mm / bar bore 31.8 mm / length 105 mm
|
| Handlebars |
KALLOY RiseBar - diam 31.8 mm / width 640 mm
|
| Grips |
KLS Wave 2Density ergonomic
|
| Headset |
FSA 1.5 semi-integrated
|
| Pedals |
plastic
|
| Mudguards |
plastic
|
| Front light |
AXA Compactline 35
|
| Rear light |
TRELOCK Duo Flat
|
| Accessories |
aluminium alloy carrier, adjustable stand, bell
|
| Sex | Men, Unisex |
| Model year | 2021 |
| Gears | 1x9 |
| Groupset | Shimano Altus |
| Colour | grey |
| Material | aluminium |
| Wheel diameter | 700C (28") |
| Drive | Shimano STePS E5000 |
| Battery | 720 Wh |
| Brakes | Hydraulic disc brakes |
| Fork | Spring |
| Fork travel | 100 mm |
| product ID | 124554 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Clearance -27% Rock Machine Crossride INT e400B Touring 29 e-bike, black/white/red
1,909 €
-27%
RRP 2,849 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews