Lapierre OVERVOLT CROSS 800 Yamaha, model 2018
Fork: SRSUNTOUR NEX-E25 LO 700C
Derailleur: SHIMANO DEORE RDM2000 10s SHADOW DESIGN
Cranks: FSA METROPOLIS 16T 170mm
Motor / battery: BOSCH PERFORMANCE Line 500Wh INTUVIA DISPLAY
Cassette: SHIMANO HG500 10s 11-42T
Chain: YBN S10 S2
Brakes: SHIMANO M315
Reels: SHIMANO SMRT10 180mm/ 160mm center lock
Shifting: SHIMANO DEORE SLM6000
Head assembly: FSA Orbit 1.5 ZS NO.57SC
Handlebars: HB-RB11L 31.8mm, 15mm X 680mm
Grips: HERRMANS OXY DD29 ERGO
Stem: HL TDS D602 31.8*17, 70mm
Seatpost: HL SP-207 350X31.6
Saddle: SELLE ROYAL SHADOW ROYAL GEL
Front hub: SHIMANO HBTX505
Rear hub: SHIMANO FHTX505
Rims: MACH1 630 disc 36H 622-21
Tires: CONTINENTAL DOUBLE FIGHTER III 29'' x 2.0
Pedals: Pedals: VP-856
Lights: SPANNINGA ILLICO/ PRESTO
Accessories: REAR KICKSTAND
Model year | 2018 |
Gears | 1x10 |
Groupset | Shimano Deore |
Material | aluminium |
Drive | Bosch Active Line |
Battery | 500 Wh |
product ID | 49752 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews