Kellys Estima COMP 80 27.5 women's electric bike, grey
Kellys Estima COMP 80 27.5 electric bike
| Drive |
SHIMANO STEPS E6100, 36 V
|
| Battery |
Shimano BT-E8010, 504 Wh / capacity 14 Ah
|
| Cycling computer |
Shimano SC-E6100
|
| Frame |
KELLYS e-FRAME City Aluminium alloy monotube, semi-integrated battery, tapered HT, integrated kickstand mount
|
| Fork |
SR SUNTOUR MOBIE-A32 Coil DS (29"), 75 mm, coil spring / 15 mm thru axle
|
| Shifting |
SHIMANO SW-E6010-R for shifting
|
| Cassette |
for internal hub Nexus 24T
|
| Chain |
SHIMANO CN-HG71 (108 articles)
|
| Crankset |
SHIMANO E6100 / SM-CRE61 (38T) - length 170 mm
|
| Brakes |
Shimano MT200 Hydraulic Disc
|
| Brake levers |
Shimano BL-MT200
|
| Brake discs |
front 160 mm / rear 160 mm
|
| Rims |
KLS Valor 3 Disc 584x30 (32 holes)
|
| Hubs |
SHIMANO MT400-B / SHIMANO Nexus C7050-5D Di2 Disc Center Lock (32 holes)
|
| Spokes |
stainless steel black
|
| Tires |
SCHWALBE Super Moto-X Performance 62-584 (27.5"x2.40) SnakeSkin, GreenGuard, ReflectiveLine
|
| Seat post |
sprung KALLOY - diam 30.9 mm / length 300 mm (S), 350 mm (M)
|
| Saddle |
SELLE ROYAL Essenza Relaxed
|
| Stem |
adjustable PROMAX a-head - diam 28.6 mm / bar bore 31.8 mm / length 85 mm
|
| Handlebars |
KALLOY RiseBar - diam 31.8 mm / width 640 mm
|
| Grips |
KLS Wave 2Density ergonomic
|
| Headset |
1.5 semi-integrated
|
| Pedals |
plastic
|
| Mudguards |
ALLOY
|
| Gear shift unit |
SHIMANO SW-E7000-L for assist
|
| Thru axle |
front SR SUNTOUR 15x100 mm
|
| Front light |
AXA Compactline 35
|
| Rear light |
TRELOCK Duo Flat
|
| Accessories |
aluminium alloy carrier, adjustable stand, bell
|
| Sex | Women |
| Model year | 2023 |
| Gears | 1x5 |
| Groupset | Other |
| Size | S, M |
| Colour | gray |
| Material | aluminium |
| Wheel diameter | 27.5" |
| Drive | Shimano STePS E6100 |
| Battery | 500 Wh |
| Brakes | Hydraulic disc brakes |
| Fork | Spring |
| Fork travel | 75 mm |
| product ID | 251839 |
| Bike size | S | M | L |
|---|---|---|---|
| Height (cm) | < 160 cm | 160 - 175 cm | > 175 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews