Lapierre E-Explorer 5.5 Low 27.5 electric bike, graphite grey matt
Lapierre E-Explorer 5.5 Low 27.5 elektrobicykel
E-Explorer predstavuje rad užívateľsky prívetivých e-trekingových bicyklov od LAPIERRE, navrhnutých pre široké spektrum využitia. Či už sa vydáte do práce, na nákupy, na jednodňový výlet alebo na dlhšie dobrodružstvo, tento elektrobicykel s asistovaným pohonom Bosch vám poskytne spoľahlivého spoločníka. Modely s nízkym nástupom výrazne uľahčujú nasadanie a zosadanie, čím prispievajú k celkovému komfortu a bezpečnosti. Vďaka vzpriamenej jazdnej polohe si užijete pohodlie pre váš chrbát a lepší výhľad na cestu, čo vám umožní lepšie vidieť a predvídať prípadné prekážky.
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
27.5” wheels
Universal size for a wide range of bicycles. The advantage is better cross-country ability, higher traction and comfort, and still good dexterity. Slightly heavier.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Coil fork
Provides adequate comfort and is usually installed on bicycles for recreational and less demanding riding. The disadvantage is its relatively heavy weight.
| Motor |
Bosch Performance Line, 600 W, 85 Nm, 25 km/h
|
| Battery |
Bosch PowerTube 540 Wh
|
| Charger |
Bosch Charger 4A
|
| Display |
Bosch Intuvia 100
|
| Frame |
Lapierre E-Explorer 5.5 Low, aluminum, Boost 110/148, Post Mount, integrated battery
|
| Fork |
SR Suntour XCM34 NLO, 27.5", 100 mm travel, 15 x 110 mm Boost thru-axle
|
| Shifting |
Shimano Cues U4000, 1x9
|
| Derailleur |
Shimano Cues U3020, 9-speed
|
| Cassette |
Shimano CUES CS-LG300-9, 11-46 teeth
|
| Chain |
KMC eGlide
|
| Cranks |
XLC CR-E15, 38 teeth
|
| Brakes |
Tektro HD-M280, hydraulic disc
|
| Wheels |
XLC WR-M37 Disc 30/584, 32H, hubs XLC HF-M15 / XLC HR-M15
|
| Tires |
XLC VT-45 Tourak, 27.5 x 2.35" (60-584), reflective stripes
|
| Seat post |
Alloy, diameter 34.9 mm, straight
|
| Saddle |
XLC SA-S11
|
| Stem |
XLC ST-M34, A-head
|
| Handlebars |
XLC HB-M32, width 740 mm
|
| Headset |
A-Head Alloy Tapered
|
| Pedals |
XLC PD-M29, aluminium
|
| Mudguards |
Curana Custom 70 mm, aluminium
|
| Lights |
AXA NXT 30 front / AXA Juno E-Bike rear, 6-12V
|
| Stand |
Ursus Mooi with XLC logo
|
| Pannier rack |
Rear rack with universal MIK system, 25 kg load capacity
|
| Sex | Men, Women, Unisex |
| Model year | 2027 |
| Gears | 1x9 |
| Groupset | Shimano Cues |
| Colour | gray |
| Material | aluminium |
| Wheel diameter | 27.5" |
| Drive | Bosch Performance 65 and 75 Nm |
| Battery | 522 Wh |
| Brakes | Hydraulic disc |
| Fork | Spring |
| Fork travel | 100 mm |
| product ID | 360108 |
| Bike size | L | M | S |
|---|---|---|---|
| Height (cm) | 180 - 190 cm | 170 - 180 cm | 163 - 173 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Sale -19% TRELOCK ZR 310 frame lock additional cable, 10 mm
from 16.99 €
-19%
RRP 24.99 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
There are currently no reviews