Shimano SPD-SL PD-R7000 pedals, composite + cleats SM-SH11
Shimano SPD-SL PD-R7000 pedals
Road SPD-SL pedals PD-R7000 with a wide pedal base for better transmission of pedaling power.|
From the Shimano 105 series
|
|
They are made of copmosite reinforced with carbon fibers
|
|
Extended bearings and steel axle for greater rigidity and power transmission
|
|
Pedal contact surface with stop reinforced with steel plates to reduce wear
|
|
Easy step in, easy step out, the force can be adjusted
|
|
Including SM-SH11 cleats with 6 ° float
|
| Colour | black |
| Float | 6° |
| Weight | 265 g (pedals, pair) 70 g (cleats, pair) |
| Material | pedal body (carbon+steel), axle (chrome+steel) |
| product ID | 62931 |
WARNING
For information on installation, adjustment and replacement of the products which are not to be found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, damage to equipment or damage to the surroundings. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury, or physical damage to equipment and surroundings.
WARNING
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Before attempting to ride with these pedals and shoes, be sure you understand the operation of the engagement/release mechanism for the pedals and shoes. SPD-SL pedals are designed to release only when you want them to. They are not designed to release automatically in a crash.
- Only use SPD-SL shoes with this product. Other types of shoes may not release from the pedals, or may release unexpectedly.
- Use only SHIMANO cleats and securely tighten the mounting bolts to the shoes. If the bolts are not securely tightened, the foot may not be able to release from the pedals, resulting in a fall.
- Before you attempt to ride with these pedals and shoes, apply the brakes, then place one foot on the ground and practice engaging and disengaging each shoe from the pedal until you can do so instinctively and with minimal effort.
- Practice riding on a level surface first until you become adept at engaging and disengaging your shoes from the pedals.
- Before riding, adjust the cleat retention force on the pedals to your preference. If the cleat retention force on the pedals is weak, the shoes may disengage accidentally, possibly causing you to lose your balance and fall off the bicycle. If the cleat retention force on the pedals is too strong, the shoes may not disengage easily.
- At slow speeds or when there is a possibility that you may need to stop (for example, when making a U-turn, approaching an intersection, riding uphill or rounding a sharp corner), release the shoes from the pedals beforehand so that you can quickly put your feet on the ground at any time.
- When riding in adverse conditions, use a lighter cleat retention force to secure the pedal cleats.
- Keep cleats and binding clean of dirt and debris to ensure proper engagement and release.
- Be sure to periodically inspect the cleats for wear. When the cleats are worn, replace the cleats and adjust the cleat retention force of the pedals before riding and after replacing the pedal cleats. If the above warnings are not followed, the shoes may not come out of the pedals when you want them to, or they may come out unexpectedly or accidentally, which could result in serious injury.
- Always install reflectors on the bicycle whenever riding on public roads. Reflectors are sold separately for models not originally equipped with reflectors. Consult the place of purchase or a distributor for information on compatible reflectors.
-If the reflectors are dirty or damaged, do not continue riding the bicycle. Otherwise, it will be difficult for oncoming vehicles to spot you.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
savings Shimano Ultegra SPD SL PD-R8000 E clipless pedals
117 €
savings
RRP 185 €
savings Shimano SM-SH11 road cleats, 6° float, yellow
11.89 €
savings
RRP 23.99 €
Sale -45% Lezyne Multi Chain Pliers multi tool, 5 functions
16.39 €
-45%
RRP 50.99 €
Sale -21% Giro Aries Spherical Canyon/SRAM Team helmet, mat white/black
239 €
-21%
RRP 319 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
