Shimano SM-SH51 MTB cleats, black
Shimano SM-SH51 MTB cases
Stops SM-SH51, for the SPD system, with the possibility of releasing the cleat from the pedal in only one direction. These cleats are supplied with most SPD type pedals.|
Easy cleat attachment on to the pedal
|
|
Suitable for all SPD type pedals
|
| Package contents | 2x stop, 2x counter with thread, 4x screw |
| Material | steel |
| product ID | 231065 |
WARNING
For assistance with installation, adjustment and replacement of the products which are not found in the user's manual, please contact the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, damage to equipment or damage to the surrounding area. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER – Failure to follow the instructions will result in death or serious injury.
WARNING – Failure to follow the instructions could result in death or serious injury.
CAUTION – Failure to follow the instructions could result in personal injury, or physical damage to equipment and the surrounding area.
WARNING
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Before attempting to ride with these pedals and cleats (shoes), be sure you understand the operation of the engagement/release mechanism for the pedals and cleats (shoes). SPD pedals are designed to release only when needed. They are not designed to release automatically in the event of a fall from your bicycle.
- Only use SPD shoes with this product. Other types of shoes may not release from the pedals, or may release unexpectedly.
- Only use SHIMANO cleats and securely tighten the mounting bolts to the shoes. If the bolts are not securely tightened, your foot may come off of the pedals, or you may fall when the cleats do not release.
- Before you attempt to ride with these pedals and cleats, apply the brakes, then place one foot on the ground and practice engaging and releasing each cleat from the pedal until you can do so instinctively and with minimal effort.
- Practice riding on a level surface first until you become adept at engaging and releasing the cleats from the pedals.
- Be sure to adjust the cleat retention force on the pedals to suit your own preference before riding. If the cleat retention force on the pedals is weak, the cleats may release accidentally, you may lose your balance, and you may fall off the bicycle. If the cleat retention force on the pedals is too strong, the cleats may not release easily.
- At low speeds or in situations where there is a possibility that you may need to stop (such as when making a U-turn, at intersections, when riding uphill or when turning a sharp corner), release the cleats from the pedals beforehand so that you can quickly put your feet on the ground at any time.
- When riding in adverse conditions, use a lighter cleat retention force to attach the pedal cleats.
- Keep cleats and bindings free of dirt and debris to ensure proper engagement and release.
- Be sure to periodically inspect the cleats for wear. When the cleats are worn, replace the cleats and adjust the cleat retention force before riding and after replacing the pedal cleats. Failure to heed the above warnings may result in the shoes not coming out of the pedals when you want them to, or the shoes may come out unexpectedly or accidentally, which could result in serious injury.
-If the reflectors are dirty or damaged, it will be difficult for oncoming vehicles to spot you. Replace the reflectors with new ones.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
