Shimano CL-MT001 SPD cleats
Multi-directional snap for easier attachment to pedals. The slim, tapered shape of the trunk makes walking easier and quieter. Designed for perfect compatibility with our new generation of Trail/Enduro pedals. Compatible with existing SHIMANO SPD pedals and shoes.
Type: MTB, Total package weight: 89g, SPD, black, Material: Steel
| product ID | 380048 |
WARNING
For installation, adjustment and replacement information of the products which are not found in the user's manual, consult the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it for future reference.
The following instructions must be always followed in order to prevent personal injury, physical damage to equipment and the surroundings. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER – Failure to follow the instructions will result in death or serious injury.
WARNING – Failure to follow the instructions could result in death or serious injury.
CAUTION – Failure to follow the instructions could result in personal injury, or physical damage to equipment and surroundings.
WARNING
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Before attempting to ride with these pedals and cleats (on shoes), be sure you understand the operation of the engagement/release mechanism for the pedals and cleats (on shoes). SPD pedals are designed to release only when needed. They are not designed to release automatically in the event of a fall from your bicycle.
- Use only SPD shoes with this product. Other types of shoes may not release from the pedals, or may release unexpectedly.
- Use only SHIMANO cleats and securely tighten the mounting bolts to the shoes. If the bolts are not securely tightened, your foot may come off the pedals, which may cause you to fall.
- Before you attempt to ride with these pedals and cleats, apply the brakes, then place one foot on the ground and practice engaging and releasing each cleat from the pedal until you can do so instinctively and with minimal effort.
- Practice riding on a level surface first until you become adept at engaging and releasing the cleats from the pedals.
- Before riding, adjust the cleat retention force on the pedals to your preference. If the cleat retention force on the pedals is weak, the cleats may release accidentally, you may lose your balance, and you may fall off the bicycle. If the cleat retention force on the pedals is too strong, the cleats may not release easily.
- When riding at low speeds or in situations where there is the possibility that you may need to stop (such as when making a U-turn, at an intersection, when riding uphill, or when cornering sharply), release the cleats from the pedals beforehand so that you can quickly put your feet onto the ground if necessary.
- When riding in adverse conditions, use a lighter cleat retention force to attach the pedal cleats.
- Keep cleats and binding clean of dirt and debris to ensure proper engagement and release.
- Be sure to check the cleats for wear periodically. When the cleats are worn, replace the cleats and adjust the cleat retention force before riding and after replacing the pedal cleats. Failure to heed the above warnings may result in the shoes not releasing from the pedals when you want them to, or they may release unexpectedly or accidentally, and serious injury may result.
-If the reflectors are dirty or damaged, do not continue riding the bicycle. Otherwise, it will be difficult for oncoming vehicles to spot you.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews