Shimano Steps SC-E7000 computer with holder

WARNING
For installation, adjustment and replacement information about the products which are not found in the user's manual, consult the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, physical damage to equipment and damage to the surroundings. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury, or physical damage to equipment and surroundings.

WARNING:
- Do not disassemble or modify the product. This may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
Ensuring Safety
- Follow the instructions below to prevent burns or other injuries due to fluid leaks, overheating, fire, or explosion.
For Safe Riding
- While riding, be careful not to devote your attention to the cycle computer display excessively. Otherwise, you may have an accident.
- Before riding the bicycle, check that the wheels are securely mounted to the bicycle. If the wheels are not securely mounted, the bicycle may topple over and cause a serious injury.
- When riding an electrically assisted bicycle, be sure to fully familiarize yourself with the bicycle's starting characteristics before riding in roadways with multiple lanes for vehicles and in pedestrian walkways. If the bicycle starts suddenly, it may lead to an accident.
- Before riding the bicycle, make sure that the front and rear lights can be turned on.
Safely Using the Product
- Before wiring or mounting parts to the bicycle, remove the battery and the charging cable. Failure to do so may result in electric shock.
- Do not move the bicycle while the battery installed on the bicycle is charging. The battery charger's AC plug may become loose and may not be fully plugged into the electrical outlet, posing a risk of fire.
- Avoid touching the drive unit after it has been used continuously for a long time. The surface of the drive unit will become hot, and contact with it may cause burns.
- Clean the chain regularly using an appropriate chain cleaner. The frequency of maintenance will vary depending on the riding conditions.
- Never use alkaline or acidic cleaning agents to remove rust. Using such cleaning agents may cause damage to the chain and result in serious injury.
- Be sure to follow the instructions in the user's manual when installing this product. In addition, it is recommended that only genuine SHIMANO parts be used. If bolts and nuts remain loose or if the product becomes damaged, the bicycle may topple over suddenly and result in serious injury.
Handling the Battery
- If fluid leaking from the battery gets into your eyes, immediately flush the affected area thoroughly with clean drinking water (tap water) without rubbing your eyes, and immediately seek medical attention. Failure to do so may damage your eyes due to the battery fluid.
- Do not charge the battery in places with high humidity or in outdoor environments. Otherwise, electric shock may result.
- Do not insert or pull out the plug if it is wet. Failure to observe this may result in electric shock. If water is leaking from the plug, thoroughly dry it before inserting it.
- If the battery does not fully charge even 2 hours after the specified charging time, immediately disconnect the battery from the outlet and contact the place of purchase. Otherwise, it may overheat, rupture, or ignite. Refer to the user's manual for the battery charger for the appropriate battery charging time.
- Do not use the battery if it has noticeable scratches or other external damage. Otherwise, it may rupture, overheat, or have operating problems.
- The operating temperature ranges for the battery are shown below. Do not use the battery at temperatures outside of these ranges.
If the battery is used or stored at temperatures outside of these ranges, fire, injury, or operating problems may result.
1. During discharging: -10 °C – 50 °C
2. During charging: 0 °C – 40 °C

CAUTION:
For Safe Riding
- For safe riding, be sure to observe the instructions in the bicycle's manual.
Safely Using the Product
- Never attempt to modify the system yourself. Doing so could cause problems with the system's operation.
- Inspect the battery charger and adapter periodically, paying particular attention to damage to the cord, plug, and casing. If the charger or adapter is damaged, do not use it until it is repaired.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not allow children to play near the product.
Handling the Battery
- Do not leave the battery in a place exposed to direct sunlight, inside a vehicle on a hot day, or in other hot places. This may cause fluid to leak from the battery.
- If leaking fluid gets on your skin or clothing, immediately wash it off with clean water. Leaking fluid may damage your skin.
- Store the battery in a safe place out of the reach of children and pets.