FOX insert for shock absorber eye 6mm (2 pcs)
Spare 2-piece set with a duralumin pin with an inner diameter of 6 mm for fixing the damper to the frame.
• The package contains parts for mounting in one eye damper, DU bushing must be purchased separately
| product ID | 74641 |
Hello,
I would like to inquire about the availability of inserts in the size 6x21.84 mm. According to the available information, these inserts should only be sold out and this product should be the replacement:
https://www.mtbiker.sk/shop/komponenty/vidlice-a-tlmice/prislusenstvo/nahradne-diely/fox-vlozka-do-oka-tlmica-6mm-alloy.html
Thanks for the info.
Dobrý deň, áno, tie v odkaze sú dostupné.
I'm trying to figure out what size I need. I don't know what the sizes listed refer to.
My piece looks exactly like the one in the picture.
The dimensions are:
- inner diameter - 6
- smaller outer diameter - 12.7
- larger outer diameter - 15.5
- length - 10.9
But none of this even comes close to the dimensions that can be selected.
Dobrý deň,
o aký tlmič/rám sa jedná?
Podľa Vašich údajov žiaľ z tohto modelu vhodný rozmer dostupný aktuálne nemáme, ale mohla by Vám sadnúť napr. kvalitnejšia vložka Alloy Crush - https://www.mtbiker.sk/shop/komponenty/vidlice-a-tlmice/prislusenstvo/nahradne-diely/fox-vlozka-do-oka-tlmica-alloy-crush-6mm-803-03-256-mk.html - verzia 6 x 21.84 mm.
Jedna sa o Fox FLOAT RP2 Boost Valve
Dobrý deň,
tak kľudne môžete použiť spomínane Crusher vložky - sú vhodné pre všetky Fox tlmiče od r. 2013. Len teda dôležitý je ten rozmer - poriadne si premerajte hlavne šírku úchytu vo vahadle, rozmery sa medzi sebou líšia len v niekoľkých desatinkách milimetra - https://www.tftuned.com/tech-help/71-mount-kits-and-bushings-for-rear-shocks.
As a "DU bushing" the following item is suitable? https://www.mtbiker.sk/shop/komponenty/vidlice-a-tlmice/prislusenstvo/fox-klzne-puzdro-1-2-x1-2-pre-tlmice.html ?
Automatically translated
Dobrý deň,
nemáme obidve položky skladom pre reálne prirovnanie, ale malo by to byť vhodné a navzájom kompatibilné.
Greetings
I ordered the roller size 19.5mm
And I got size 9.5mm
If I understand correctly, the length is measured from the side in full length from top to bottom?
Plus the description says the price is for 2 pairs
Well, only one couple came.
If
Zdravim, poslite nam prosim fotku nameraneho udaju na [email protected] do predmetu uvedte prosim cislo objednavky a preberieme to s dodavatelom. Produkt su 2 kusy, teda 1 par.
Hello. I would need exactly this same two-piece insert for the muffler eye, but the inner size is 8mm. Could you get me this size, or will you also have this size on offer? Thank you
Automatically translated
Dobry den,
aku sirku potrebujete?
Dakujem.
Zdravím . Šírka by mala byť 12mm
Dobry den,
nemyslim priemer oka (vonkajsi priemer vlozky), ale sirku Vasho montazneho pristoru (vnutorna sirka vahadla/mountu na rame), resp. teda vonkajsia sirka vlozky (vratane podloziek). Podla ramu je to standardne v rozsahi 15.8 - 80 mm.
Pardón 😅 je to cca 29_30 mm
8 x 30.0 mm dostupne napr. tu od RS (sedi aj na tlmice inych znaciek samozrejme, rozmer oka je standardizovany (12.7 mm)) - https://www.mtbiker.sk/shop/komponenty/vidlice-a-tlmice/prislusenstvo/nahradne-diely/rockshox-deluxe-super-deluxe-metric-8-mm-set-capu-tlmica-300-mm-p137126.html.
Pozor na tu sirku - vlozka musi sadnut uplne presne, aby medzi ramom a tlmicom nebola vola, takze odporucame merat naozaj pozorne
Ďakujem veľmi pekne za pomoc 💪 produkt pridaný do objednávky....
Nenapadlo ma pozerať aj produkty iných výrobcov. Ja keď pozerám tak filtrujem len Fox 😅😄
Kedy bude v rozmere 8mm??
Dobrý deň,
8 mm sú nedostupné a dostupnosť je neznáma.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Classic.
Automatically translatedGood
Automatically translated
P
Translate by GoogleShow the original