FORCE Trek 28" fixed fork, aluminium
FORCE Trek 28" fixed fork
Solid 28" trekking fork made of lightweight ALU alloy, straight Ahead 1 1/8" post and welds for disc and V-brakes.| Colour | black |
| Wheel diameter | 28" |
| Weight | 880 g |
| Steerer tube | Ahead 1 1/8", 260 mm |
| Material | Al 6061 |
| product ID | 60845 |
•
Variant FORCE Trek 28" pevná vidlica, hliník
I would like to ask you to measure again the size of the fork from the axle to the neck, because it is about 3 cm shorter than the carbon one on the same but carbon one. In my case, the size you mentioned is 5 cm shorter than the flood fork was, is that too much? I don't intend to catch up with the 5 cm higher neck and pads to make it look like a factory chimney, at most as I have 1+1 cm pads now, so the loss of 5 cm would be really real
Automatically translated
•
Dobrý deň,
rozmer sedí, vidlica je od osy náboja po spodnú misku hlavového zloženia dlhá 435 mm. Karbónový model má diametrálne odlišnú korunku, tam vzniká spomínaný rozdiel v celkovej dĺžke.
5 cm je veľký rozdiel, tam sa výrazne zmení aj hlavový uhol - bude strmší o asi 1.5°, a naviac aj tá Vami spomínaná zmena v polohe (výške) riadítok - je to už pomerne citeľná zmena.
•
edit
Bude vacsi tlak na nerovnosti horší nabeh na nerovností tym pádom bude viac kopat kazda jama, viac trpieť ram v oblasti navarku pre krk , nehovoriac o rafiku bude dostavat v dosledku zmene uhla o cca 1.5 stupna ovela vacsie supy pri kazdej jednej jame. Vy ste mi len moje obavy potvrdili , ano meni to uhol vidlice tym padom aj schopnost zehlenia nerovnosti .nema zmysel do toho ísť.
•
Variant FORCE Trek 28" pevná vidlica, hliník
Hello,
Please, what is the difference between this fork and https://www.mtbiker.sk/shop/komponenty/vidlice-a-tlmice/pevne-vidlice/force-mtb-26-pevna-alu-vidlica-1-1-8--cierna-matna.html ?
•
Dobrý deň,
Sú to identické produkty a zlúčili sme ich do jedného.
•
Variant FORCE Trek 28" pevná vidlica, karbón/hliník
Good day, I want to replace the old Rockshox Judy 80mm stroke, spring for 26" MTB with this fixed one and give narrower plastic. How long is this fork from axle to head assembly? Or which one would you recommend so that I don't change the geometry, mine is about 450mm. Well thank you
Automatically translated
•
Dobry den,
axle-to-crown dlzka tejto vidlice je 415 mm.
Odporucame tak skor napr. tento model - https://www.mtbiker.sk/shop/komponenty/vidlice-a-tlmice/pevne-vidlice/force-trek-28-pevna-alu-vidlica-1-18-cierna-leskla.html#278233 - disponuje dlzkou 435 mm.
•
Variant FORCE Trek 28" pevná vidlica, hliník
Hi
Is this fork suitable instead of SR Suntour 3031 Al?
I measured the length of the leg at 480 mm, of course this is straight, maybe it would be enough
I'm asking because the front part of my bike won't come off.
Well thank you
•
Asi nie, dlzka noh je vyrobcom pisana 435 mm. Skuste mozno https://www.mtbiker.sk/shop/komponenty/vidlice-a-tlmice/pevne-vidlice/force-29-pevna-alu-vidlica-1-1-8--ahead.html . Tam vyrobca pise 475 mm. Vid : https://www.force.bike/vidlice-force-mtb-29-al-1-1-8-ahead-d-cerna
•
Variant FORCE Trek 28" pevná vidlica, hliník
Hello, my tires say 700 x 35c, will this fork be good for me? and when he measured the ring or the crown under the pillar, it showed me 45.16 mm. It is a Maxbike Cx 4000 bike
Automatically translated
•
Dobrý deň,
podľa špecifikácie Vášho rámu (napr.: https://www.maxbike.cz/eshop/ram-maxbike-cx4000-2019-590-matne-cerny-oranzova-reflex) Vám táto vidlica bude sedieť.
•
Variant FORCE Trek 28" pevná vidlica, hliník
please
can you get brake caps that screw onto the fork? I managed to break one and can't find it anywhere on the internet.
Thank you very much.
•
Dobrý deň,
Mrzí nás to ale výrobca takýto diel neponúka.
•
Variant FORCE Trek 28" pevná vidlica, karbón/hliník
Hello, I want to replace the front steel fork of my older cross bike with a carbon one, but I don't know if it will fit me, the neck diameter of the old fork is 25.4 mm.
Automatically translated
•
Dobrý deň,
Vidlica Vám sedieť nebude a s krkom 25,4 mm žiaľ karbónovú vidlicu zohnať nevieme.
•
Variant FORCE Trek 28" pevná vidlica, karbón/hliník
Hello, will a 42mm tire fit in the fork? Or can you recommend a v-brake fork that will fit such a tire? Of course, a 28” wheel ?
Automatically translated
•
Dobrý deň,
preveríme a dáme Vám vedieť.
•
ďakujem, chcem to na cyklokrosku a práve tam mám v-brake, ak táto informácia pomôže, takže hľadám niečo kde aj zablatené koleso prejde relatívne bez problémov
•
Dobrý deň,
mal by vojsť aj 42mm plášť.
•
Variant FORCE Trek 28" pevná vidlica, hliník
Dobrý večer,vie mi niekto premerat zistit vzdialenosť od tej dierky po osku kolesa? Ďakujem chcem to použiť na starší cestak.
•
Dobry den, zial priamo my aktualne pomoct nevieme - vyrobca tento udaj neudava, a vidlicu momentalne nemame dostupnu skladom priamo u nas, tak nemame moznost premerat
Samozrejme vzdy ju mozete objednat a ak by nesadla, tak nie je problem produkt vratit - https://www.mtbiker.sk/shop/informacie/vsetko-o-nakupe.html#vratenie-a-reklamacie.
•
Variant FORCE Trek 28" pevná vidlica, hliník
Please
What is the pitch on the axis of the charge?
How high is the growth, or how big does the tire fit with size 700?
Thanks for the info
•
Dobrý deň,
rozteč pre náboj je 100mm a v hornej časti je šírka vidlice cca 55mm.
•
Variant FORCE Trek 28" pevná vidlica, karbón/hliník
Hello,
Please, what is the maximum tire width that can be fitted to this fork?
Thank you very much
•
Dobrý deň, malo by to byť 28mm.
•
Variant FORCE Trek 28" pevná vidlica, karbón/hliník
Hello,
I want to ask if the pivots intended for mounting the V-Brake can be removed from the fork legs?
well thank you
•
Dobrý deň,
Preveríme u dodávateľa
•
Dobrý deň,
"Návarky" na V-Brake nie je možné demontovať.
•
Prave som ju namontoval a po stiahnuti plastovych krytiek sa daju V-brake osky jednoducho vyskrutkovat - su tam plosky pre kluc 8mm.
•
Dobrý deň,
Ďakujeme za info, budeme vedieť v prípade ďalšieho dotazu. Preverovali sme to u dodávateľa a fyzicky sme to my neoverovali.
•
Variant FORCE Trek 28" pevná vidlica, hliník
Good day
Can the V-brake brackets be removed (they are quite visually distracting, I'll use disc brakes)? Thanks
•
Dobry den,
samotne pivoty ano, zostanu len navarky (tie je pripadne mozne natrvalo odfrezovat a zahladit).
•
Variant FORCE Trek 28" pevná vidlica, karbón/hliník
Hello,
Please, what is the maximum tire width that can be fitted to the fork?
Thank you
•
Dobrý deň,
medzera meria 500mm, najširší plášť doporučujeme 420mm.
•
Variant FORCE Trek 28" pevná vidlica, hliník
It is possible to exchange the Zoom Swift 140 fork for this fork. Well thank you
Automatically translated
•
Nazdar ak máš rychloupinak a rovný KRK 1 1/8 tak áno , jedno ti poradim odmeraj si rozmer AXLE TO CROWN , cca by to malo sediet maximalne +- 1 cm , a le to uz naozaj max.. Najdi na google axle to crown a budeš vidieť čo myslím .
•
Variant FORCE Trek 28" pevná vidlica, hliník
When will the fork be available? Can someone please check? Thank you
Automatically translated
•
Dobrý deň,
U výrobcu bude naskladnená po 20.10.2021. Momentálne je vypredaná a nevieme ju dodať.
•
Variant FORCE Trek 28" pevná vidlica, hliník
Hi, what is the dimension from axle to crown? Thanks in advance.
•
Variant FORCE Trek 28" pevná vidlica, hliník
Hello, how long is the neck of the supplied fork?
Automatically translated
•
Dobry den,
celkova dlzka nezrezaneho krku je 260 mm.
•
Variant FORCE Trek 28" pevná vidlica, karbón/hliník
tiez ma zaujima max sirka plasta.
•
Dobrý deň,
malo by to byť 25-28mm.
•
•
Ja tam na tento https://www.mtbiker.sk/shop/plaste-a-duse/cesta-a-trekking/trekkingove-plaste/continental-ride-tour-extra-puncture-belt-28x1-75--47-622-cierna-hneda.html a sirsi by som uz asi nedaval.
•
Variant FORCE Trek 28" pevná vidlica, hliník
sorry,
I meant this one https://www.mtbiker.sk/shop/komponenty/vidlice-a-tlmice/pevne-vidlice/force-trek-28-pevna-alu-vidlica-1-1-8--cierna-leskla.html
•
Variant FORCE Trek 28" pevná vidlica, hliník
that price ??? I regret that when it was 59 I didn't take 3
Automatically translated
•
Variant FORCE Trek 28" pevná vidlica, karbón/hliník
Ďakujem za informáciu.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
Variant FORCE Trek 28" pevná vidlica, hliník
I bought the aluminum version. Excellent build quality, seems pretty sturdy too
Automatically translatedVariant FORCE Trek 28" pevná vidlica, karbón/hliník
Excellent damping selection. Real weight 685g with 20cm post. Manufacturer CarbonTech.
Automatically translatedVariant FORCE Trek 28" pevná vidlica, hliník
prrobil som si MTB na Gravel a vidla sadla super a aj to bobre vyzerá
Translate by GoogleShow the originalVariant FORCE Trek 28" pevná vidlica, hliník
Everything at a professional level.
Automatically translatedVariant FORCE Trek 28" pevná vidlica, hliník
Everything fit and fell into place.
Automatically translatedVariant FORCE Trek 28" pevná vidlica, karbón/hliník
Excellent fork, less finish - stains already on the new fork + V brake can only be set to one position (spring), they are not available 3. Probably the best thing you can get if you are doing some kind of puzzle.
Automatically translatedIn my opinion, it is compatible with tires up to 40 mm wide, a lot of space above the tires, maybe even 3 cm - for a tip top fender. I use it with a 28' wheel - Marathony Schwalbe tires - 28mm 700c
Variant FORCE Trek 28" pevná vidlica, hliník
The fork fulfills its purpose. The only downside is the surface treatment. The paintwork is not very durable and of good quality.
Automatically translatedVariant FORCE Trek 28" pevná vidlica, hliník