scheduleOur stores and their opening hours
Localisation
home navigate_next Components navigate_next Cranksets and chainrings navigate_next Chainrings navigate_next absoluteBLACK OVAL oval chainring, 12-sp., 96 BCD, XT M8000
absoluteBLACK

absoluteBLACK OVAL oval chainring, 12-sp., 96 BCD, XT M8000

79.99 €
These goods are unavailable
heart_plusAdd it to your wishlist and we will inform you, when it will be available, or see other products in the category:
Chainrings Chainrings (absoluteBLACK)
Rating (3)
Show all reviews
5/5
shopping_cart
more than 20 customers
have already purchased this product

The absoluteBLACK Premium 1X Oval 96BCD narrow wide chainring is designed for Shimano XT M8000, SLX M7000 and MT700 1x or 2x cranks Only. These chainrings fit Boost and non-boost bikes as correct offset is realized by the crank spider itself, not chainring.

Increase your performance by up to 9%: the Oval XT M8000/SLX M7000 Chainring from absoluteBLACK

Oval chainrings simplify pedaling and reduce leg tiring on gradients. Believe it (or not), but round chainrings do not transmit the force as evenly to the rear wheel as an oval chainring. A 32Z oval chainring has the smallest diameter (corresponding to 30Z) at the dead point (lowest point of the kicking movement) and the largest diameter (corresponding to 34Z) at the highest point. This means that with a 32Z oval chainring you are faster than with a round chainring! With the oval chainrings you don't need more force, but with the adapted force development you are faster. The confusing thing about the whole thing is that most riders find the kicking motion rounder than with a round chainring. You can hardly imagine this and present it on the website - you have to try it yourself to believe it.

Features - Oval XT M8000/SLX M7000 Chainring

  • Finest design to provide excellent weight to strength ratio
  • One of a kind special oval shape (Patent Pending)
  • Greatly improves traction and climbing abilities
  • Unique Patent Pending alternate wide and narrow teeth profiles to keep your chain in place for minimum 12 months!
  • Special 3D teeth machining for ultimate mud relief decrease wear and noise dramatically
  • You will not "feel" the oval shape at all
  • Reduces stress on knees
  • 9/10/11/12-speed and Eagle Compatible

Product features

  • Use: MTB
  • Compatibility: Shimano XT M8000, SLX M7000 and MT700 cranksets 1X and 2X only
  • Mounting: 4x96mm BCD
  • Gears: 9-/10-/11-/12-speed
  • Chainline: 49mm
  • Ovality: 10,2-14,4%

Graduation (choose variant)

  • 30 teeth
  • 32 teeth
  • 34 teeth
  • 36 teeth

Material

  • 7075 aluminum

Color

  • black

Weight

  • starting from 44g (manufacturer information)

Scope of delivery

  • 1 x Oval XT M8000/SLX M7000 Chainring

Are You Ready to TRY OVAL chainring ? Extreme Test ROUND vs OVAL

Product features
Compatible with XT M8000, M7000 and MT700 cranks only
Special milling and higher tooth profile prevent the chain from falling off the chainrings without the use of a guide
Can only be used for 12-speed chain - CN-M9100, 8100, 7100 & 6100 12spd Hyperglide+
Product details
Colour black
Groupset Shimano XT
Number of teeth 30T, 32T, 34T, 36T
Converter mounting BCD 96 mm
Weight 30T (44 g), 32T (50 g), 34T (60 g), 36T (69 g)
Material AL 7075
Compatibility only for XT M8000, SLX M7000, MT700 and Deore M6000, M5100 & M4100 cranks
product ID 112434
Product rating  (3 ratings)
5/5
(3 ratings)
(3 ratings)
(0 ratings)
(0 ratings)
(0 ratings)
(0 ratings)
How do you rate the product?
Add a review
Help others, earn points and shop better prices thanks to the loyalty program
Reviews verified Verified purchases
Bartikm Bartikm • 10 June 2022 at 17:52
thumb_up-1thumb_down

It's not any easier when going uphill, but thanks to it I got rid of the popping in my knee when walking, also fits boys FC-MT511

Automatically translated
10 June 2022 at 17:52
thumb_up-1thumb_down
pvalovic2 pvalovic2 • 7 august 2023 at 10:23
thumb_up0thumb_down

SK Super

Translate by GoogleShow the original
7 august 2023 at 10:23
thumb_up0thumb_down
dionyz20 dionyz20 • 22 May 2022 at 10:09 edit
thumb_up0thumb_down

22 May 2022 at 10:09 edit
thumb_up0thumb_down
Add rating
Product questions
winnysan winnysan • 8 April 2022 at 8:52
thumb_up0thumb_down

SK Dobrý deň, v popise produktu:
Kompatibilné iba s kľukami XT M8000, M7000 a MT700 - "iba"
Určenie: len pre kľuky XT M8000, SLX M7000, MT700 a Deore M6000, M5100 & M4100 - napísané pod tým
Môže byť použité len pre 12-rýchlostnú reťaz - M5100 je 10/11 reťaz

teda čo je z toho pravda?

Translate by GoogleShow the original
8 April 2022 at 8:52
thumb_up0thumb_down
gronkjear gronkjear Customer support • 8 April 2022 at 10:24 •replywinnysan
thumb_up0thumb_down

SK Dobrý deň,

tento konkrétny model prevodníka je určený pre kľuky XT M8000, SLX M7000, MT700, MT610, M5100, M6000 & M4100 a je kompatibilný LEN s 12-rýchlostnými reťazami Hyperglide+, t.j. CN-M9100, 8100, 7100 & 6100 - s 11-rýchlostnou reťazou kompatibilný nie je.

Popis je teda správny - FC-M5100 sú kľuky, nie reťaz.

Translate by GoogleShow the original
8 April 2022 at 10:24
thumb_up0thumb_down
marekon7745 marekon7745 • 30 november 2020 at 11:07
thumb_up0thumb_down

SK Dobry den, ak tomu dobre rozumiem tak ked menim povodny pohon shimano 8000 xt 1x11 na shimnano 8100 xt, vpredu na klukach mi staci vymenit len tento samotny prevodnik?
Samozrejme ze ostatne komponenty vratane orecha musim dat 8100 xt.
Dakujem za info.

Translate by GoogleShow the original
30 november 2020 at 11:07
thumb_up0thumb_down
jaroslavf jaroslavf Customer support • 1 december 2020 at 6:00 •replymarekon7745
thumb_up1thumb_down

SK Dobrý deň,

Áno stačí vymeniť prevodník bez nutnosti meniť celé kľuky.

Translate by GoogleShow the original
1 december 2020 at 6:00
thumb_up1thumb_down
brano098 brano098 • 20 May 2021 at 20:38
thumb_up0thumb_down

SK Dobry den,
mam kellys thorx 30 (2020). nemate nahodou skusenost, ci sa tento prevodnik vmesti tak, aby nezavadzal ram? original je tam 34T a medzi prevodnikom a ramom nie je moc vela miesta. chel by som tam dat oval 34T
dakujem.

Translate by GoogleShow the original
20 May 2021 at 20:38
thumb_up0thumb_down
gronkjear gronkjear Customer support • 22 May 2021 at 12:11 •replybrano098
thumb_up0thumb_down

SK Dobrý deň,

bohužiaľ, osobnú skúsenosť nemáme. Ale ak sa Vám teraz zmestí 34T, tak s najväčšou pravdepodobnosťou bude sedieť aj tento ovál 34T.

Ak by Vám náhodou prevodník po objednaní nevyhovoval, tak ho nepoškodený máte právo tak ako akýkoľvek iný tovar od nás samozrejme vrátiť, viď. https://www.mtbiker.sk/shop/informacie/vsetko-o-nakupe.html, časť "Čo ak sa mi tovar nepozdáva?".

Translate by GoogleShow the original
22 May 2021 at 12:11
thumb_up0thumb_down
NikolasB NikolasB • 27 May 2021 at 10:46 •replybrano098
thumb_up0thumb_down

SK A sedí? Aj ja by som nad ním uvažoval pre Thorx 30 2021.

Translate by GoogleShow the original
27 May 2021 at 10:46
thumb_up0thumb_down
brano098 brano098 • 27 May 2021 at 11:52 •replyNikolasB
thumb_up1thumb_down

SK Neviem, chcem ist kupit tento vikend alebo buduci tyzden. Dam vediet. Ale rozmyslam kupit radsej 32T, ten sa tam vojde urcite a nie je to az taky rozdiel v prevodovych pomeroch. Ten 34T oval by ma mat najvacsi priemr ako 36T normalny a co som to pozeral, zda sa mi, ze by to bolo velmi tesne

Translate by GoogleShow the original
27 May 2021 at 11:52
thumb_up1thumb_down
gronkjear gronkjear Customer support • 27 May 2021 at 14:49 •replybrano098
thumb_up0thumb_down

SK Dobrý deň,

vopred ďakujeme aj my za info, verím, že to môže pomôcť množstvu zákazníkov - niet nad osobnú skúsenosť s priamou kombináciou

Translate by GoogleShow the original
27 May 2021 at 14:49
thumb_up0thumb_down
dionyz20 dionyz20 • 23 April 2022 at 8:13 edit
thumb_up0thumb_down

SK Prosím Vás, môžem použiť tento prevodník na kľuky FC-MT510 ?
Bude to fungovať normálne aj s rýchlospojkou? v mojom prípade reťaz shimano M7100

Translate by GoogleShow the original
23 April 2022 at 8:13 edit
thumb_up0thumb_down
gronkjear gronkjear Customer support • 25 April 2022 at 9:26 edit •replydionyz20
thumb_up0thumb_down

SK Dobrý deň prajem,

Prevodnik je kompatibilný s akoukoľvek 12spd Hyperglide+ reťazou, vrátane CN-M7100.

Translate by GoogleShow the original
25 April 2022 at 9:26 edit
thumb_up0thumb_down
Roman Roman • 12 May 2023 at 8:55
thumb_up0thumb_down

SK Dobrý deň
je možné tento prevodník použiť ku klukám Shimano SLX 7120

Translate by GoogleShow the original
12 May 2023 at 8:55
thumb_up0thumb_down
gronkjear gronkjear Customer support • 12 May 2023 at 14:18 •replyRoman
thumb_up0thumb_down

SK Dobry den,

nie, prevodnik sediet nebude, kluky M7120 (resp. M7100 a M7130) vyuzivaju uz novsi Direct Mount standard uchytenia prevodnikov. Vhodny je tento prevodnik: https://www.mtbiker.sk/shop/komponenty/kluky-a-prevodniky/prevodniky/absolute-black-oval-prevodnik-shimano-xtr-m9100-direct-mount.html#157888.

Translate by GoogleShow the original
12 May 2023 at 14:18
thumb_up0thumb_down
vladoha vladoha • 23 March 2023 at 15:22
thumb_up0thumb_down

SK Zdravim, pasoval by na kluky: Shimano FC-MT512-1 ? Vdaka.

Translate by GoogleShow the original
23 March 2023 at 15:22
thumb_up0thumb_down
gronkjear gronkjear Customer support • 23 March 2023 at 15:40 •replyvladoha
thumb_up0thumb_down

SK Dobry den,

roztec BCD je vhodna, avsak prevodnik je frezovany presne na uvedene kluky (FC-M8000 atd.), ktore disponuju odlisnym typom uchytenia skrutiek - kompatibilitu s klukami FC-MT512 Vam tak zial zarucit nevieme, vyrobca tuto kombinaciu neudava a osobnu skusenost zial nemame.

Ak sa rozhodnete prevodnik objednat a nahodou by predsa nesadol, prip. by licovanie s telom kluky nebolo idealne a i., tak ho samozrejme nie je problem neposkodeny vratit - https://www.mtbiker.sk/shop/informacie/vsetko-o-nakupe.html.

Translate by GoogleShow the original
23 March 2023 at 15:40
thumb_up0thumb_down
Bartikm Bartikm • 23 March 2023 at 16:36 •replyvladoha
thumb_up1thumb_down

SK Zdravim, mam ho na FC-MT511 co je myslim rovnaky typ a nieje tam ziaden problem, skvele to funguje

Translate by GoogleShow the original
23 March 2023 at 16:36
thumb_up1thumb_down
Ivo_Ba Ivo_Ba • 19 June 2021 at 20:32
thumb_up0thumb_down

SK Dobry den. Bude to pasovat aj na xt m8100 kluky? Dakujem

Translate by GoogleShow the original
19 June 2021 at 20:32
thumb_up0thumb_down
gronkjear gronkjear Customer support • 20 June 2021 at 23:28 •replyIvo_Ba
thumb_up1thumb_down

SK Dobrý deň,

podľa špecifikácie výrobcu bohužiaľ na kľuky FC-M8100 tento prevodník pasovať nebude.

Translate by GoogleShow the original
20 June 2021 at 23:28
thumb_up1thumb_down
absoluteBLACK
Chainrings absoluteBLACK
In a very short time, this young brand has become the leader in the number of sold oval converters in the world. The brand focuses strictly on the production of oval converters, with production taking place in Poland, using German aluminium and final anodizing taking place in the UK, where the company is headquartered.
Contact information
Shopping FAQ

All the answers to questions about delivery, payment, security, returns, warranty and much else.

You may find these products complementary
All products from the category
Bike chains
Show all
Front derailleurs
Show all
Bicycle multi tools
Show all
Bottom bracket tools and bottom bracket cup wre...
Show all
Why shop with us?
Find out what makes us special
1 500 000+ orders

We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.

Unique customer service

We are available via e-mail, online chat, phone or in person at our MTBIKER stores.

We actively support the cycling community in Slovakia

Thanks to your order we can support cycling development.

Secure payment methods

The payment process is safe and we offer you a wide range of options.

Loyalty program

We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.

MTBIKER centre and showroom

Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.

navigate_beforeprevious navigate_nextďalší
keyboard_arrow_up