Shimano FC-MT510 HTII cranks, 175 mm, 1x12, 34T
Shimano FC-MT510 HTII cranks
Two-piece cranks with a fixed axis designed for 12-speed transmission systems.| Groupset | Other |
| Gears | 1x12 |
| Crank length | 175 mm |
| Technologies | Dynamic Chain Engagement |
| Technical designation | EFCMT5101EXA4L |
| Pitch of the chainring screws | 96 mm |
| Package contents | cranks only, no center assembly |
| Chainline | 52 mm |
| Q-Factor | 177 mm |
| For frame width | 68/73 mm |
| For the width of the rear structure | 135 mm / 142 mm / 148 mm |
| Weight | 753g (170mm/32T) |
| Converter size | 34T |
| product ID | 117984 |
WARNING
For assistance with installation, adjustment, and replacement of products not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this “user's manual” thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions must always be followed in order to prevent personal injury and physical damage to equipment and the surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to equipment and the surroundings.
WARNING:
Do not disassemble or modify the product. This may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
Before riding the bicycle, check that there are no cracks in the crank arms. If there are cracks, the crank arm may break and you may fall off the bicycle.
Be careful not to allow parts of your clothing to get caught in the chain during riding. If you do, you may fall off the bicycle.
CAUTION:
Be careful and do not touch the gear teeth. There is a danger of injury.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
