Shimano brake Ultegra R8100 rear CS51 10,5mm lockring (R55C4)
Ultegra R8100 brake calipers offer an exceptional balance of stiffness, weight and stopping power. Maximum tire width: 28C.
Technologies used: SLR-EV
- Type: ROAD
- Total package weight: 314g, Rear, black
- SLR - SHIMANO Linear Response, CS51, 10.5mm nut
- Brake pads: R55C4
- Material: Aluminum / Steel
LEAVE TIME BEHIND
Escape the everyday stereotype, discover endless possibilities and a sense of freedom. Find out what really matters and get ahead of the times with the new Ultegra.
| Location | Rear |
| product ID | 153528 |
WARNING
For installation, adjustment and replacement information for products not found in the user's manual, consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this “user's manual” thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions must always be followed in order to prevent personal injury and physical damage to equipment and the surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER – Failure to follow the instructions will result in death or serious injury.
WARNING – Failure to follow the instructions could result in death or serious injury.
CAUTION – Failure to follow the instructions could result in personal injury or physical damage to equipment and the surroundings.
WARNING
- Because each bicycle may handle slightly differently depending on the model, learn the proper braking technique (including pressure on the brake lever and bicycle handling characteristics) and operation of your bicycle. Improper use of your bicycle's brake system may result in a loss of control or fall, which could lead to serious injury.
- Do not disassemble or modify the product. Doing so may cause the product to not operate correctly, and you may unexpectedly fall and be seriously injured.
- Do not apply the front brake too strongly. Doing so may cause the front wheel to lock and the bicycle to tip forward, causing serious injury.
- Because the required braking distance will be longer during wet weather, reduce your speed. Apply the brakes well in advance and gently. You may fall or collide and be seriously injured.
- A wet road surface can cause tires to lose traction. To avoid this, reduce your speed and apply the brakes well in advance and gently. If the tires do happen to lose traction, you may fall and be seriously injured.
- Do not allow any oil or grease to get onto the brake shoes. Riding the bicycle with oil or grease on the brake shoes may cause the brakes to not work, leading to serious injury as a result of a fall or collision.
- Do not use the brake cable if it is rusty, frayed, or cracked. Otherwise, the brakes may not work correctly.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
