Shimano XT BR-M8200 hydr. front brake, Post Mount, hose 1,000 mm + G05A pads
Deore XT M8200 hydraulic disc brake. It consists of a BL-M8200 lever, BR-M8200 caliper and SM-BH90 tubing. The brakes are filled with low viscosity mineral oil and bled. Lever sleeve compatible for mounting a shifter with an I-Spec EV mount. Brake pads G05A.
Type: MTB, Total package weight: 612g, Front, black, One Way Bleeding, Hose length: 1000mm, Mounting: Clamp, Post Mount, Material: Aluminum / Steel
Brake Mounting: Post Mount
Location: Front
Brake technology: Hydraulic
Brake designation: MTB
| Location | Front |
| Brake type | hydraulic |
| product ID | 353252 |
WARNING
For information on the installation, adjustment and replacement of the products which are not to be found in the user’s manual, please consult the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this “user's manual” thoroughly before use, follow it for correct use, and keep it in a place where it can be referred to at any time.
The following instructions should always be followed in order to prevent personal injury, damage to equipment or damage to the surroundings. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury, or physical damage to equipment and surroundings.
WARNING
- Because each bicycle may handle differently depending on the model, learn the proper braking technique (including pressure on the brake lever and bicycle control characteristics) and operation of your bicycle. Improper use of the bicycle's brake system may result in a loss of control or fall, which could lead to serious injury.
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Downhill riding and freeriding are inherently dangerous activities. It is strongly recommended that riders wear head and body protection gear and perform a thorough safety inspection of their bicycle before each ride. Remember that you ride at your own risk and therefore you should consider your experience and abilities very carefully. There is a risk that you may be involved in an accident resulting in serious injury or death.
- Before riding the bicycle, riders must get used to the higher performance of this brake.
- The brake system is designed for downhill riding and freeriding, and its braking force is much higher than that of other brakes. If you do not familiarize yourself with the performance level of this brake, you may be involved in an accident resulting in serious injury or death. In addition, the brake settings do not allow for riding on city streets. Sudden braking may cause the bicycle to fall forward, which may result in serious injury or even death.
- 203 mm and 180 mm disc brake rotors provide greater braking force than 160 mm disc brake rotors. If you ride the bicycle without thoroughly familiarizing yourself with the braking characteristics, braking may result in a fall from the bicycle with the possible result of serious injury or a fatal accident.
- In addition, be very careful to keep your fingers away from the rotating disc brake rotor. The disc brake rotor is sharp enough to cause serious injury to your fingers if your fingers get caught in the openings of the moving rotor.
- Do not touch the calipers or disc brake rotor during or immediately after riding the bicycle. The calipers and disc brake rotor become hot during braking, so you may be burned if you touch them.
- Be careful not to get any oil or grease on the disc brake rotor and brake pads. Riding the bicycle with oil or grease on the disc brake rotor and brake pads may cause the brakes to not work, and may lead to serious injury as a result of a fall or collision.
- Check the brake pad thickness and do not use them if they are 0.5 mm or less in thickness. Doing so may cause the brakes to not work, and may lead to serious injury.
- Do not use the disc brake rotor if it is cracked or deformed. The disc brake rotor may break and lead to serious injury caused by a fall. Replace the disc brake rotor with a new one.
- Do not use the disc brake rotor if its thickness is 1.5 mm or less. Also, do not use it if the aluminum surface is visible. The disc brake rotor may break and lead to serious injury caused by a fall. Replace the disc brake rotor with a new one.
- Do not apply the brakes continuously. Doing so may cause a sudden increase in the brake lever stroke, cause the brakes to not work, and lead to serious injury.
- Do not use the brakes if there is fluid leakage. Doing so may cause the brakes to not work, and lead to serious injury.
- Do not apply the front brake too strongly. If you do so, the front wheel may lock and the bicycle may topple forward, causing serious injury.
- Because the required braking distance will be longer during wet weather, reduce your speed. Apply the brakes early and gently. You may fall or collide and be seriously injured.
- A wet road surface can cause the tires to lose traction. To prevent this, reduce your speed and apply the brakes early and gently. If the tires do lose traction, you may fall and be seriously injured.
CAUTION
- Cautions regarding SHIMANO genuine mineral oil
- Use suitable eye protection when handling, and take care to prevent it from getting into your eyes. If it gets into your eyes, flush your eyes with clean water and seek medical advice immediately. Contact with the eyes may cause irritation.
- Wear protective gloves during handling. If it gets on your skin, wash it off thoroughly with soap and water. Contact with the skin may cause rashes and discomfort.
- Protect your nose and mouth with a protective breathing mask, and use in a well-ventilated room. Inhaling mineral oil vapor or fumes may cause nausea.
- If you inhale mineral oil vapor or fumes, move to a place where there is fresh air. Cover yourself with a blanket. Stay warm in a stable position and seek expert medical advice immediately.
Break-in period
- Disc brakes have a certain break-in period, and the braking force gradually increases along with the increasing break-in period. Be sure to avoid any such increases in braking force while using the brakes during the break-in period. The same situation occurs when replacing the brake pads or disc brake rotor.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews