Rock Machine RaceRide 300, 2016 model
Fast cycling on narrow wheels. Road cycling will conquer everyone who loves a fast and smooth ride.
Minimal air resistance. Maximum power transmission for forward movement. Precise control. Racing
set geometry. These are all qualities that make Rock Machine road bikes real racing specials. In addition, the RR 300 and RR 200 2016 are built on new frames, reminiscent of carbon models, with the pleasant bonus of routing cables and bowdens inside the frame.
Specification:
Sizes/ Weight (kg): 48, 51, 54, 57, 60 cm/ 9.5
Frame, Stroke (R/Z mm): Alu 6061.T6 Multibutted
Fork: Carbon UD
Cranks with converters: FSA Vero Compact 50/34T
Front derailleur: Shimano Tiagra 4700
Rear derailleur: Shimano Tiagra 4700 GS
Shifters: Shimano Tiagra 4700 2x10
Kazate: Shimano HG500-10 11-32T
Chain: KMC X10
Brakes: Tektro R312
Center composition: FSA BB-7420ST
Head assembly: FSA Orbit C-40 No.42/ACB
Pedals: ----------
Hubs: ONE KT Road
Rims: Weinmann Flier 24H
Spike : Sapim Race
Tires / Tubes: Schwalbe Lugano 700x25C
Stem: ONE Sport SL 31.8mm
Handlebars: HL Corp Compact
Grips: Velo StickyGel
Seat post: ONE Sport
Saddle: Selle Royal Seta Performa
Model year | 2016 |
Gears | 2x10 |
Groupset | Shimano Tiagra |
Material | aluminium |
product ID | 20569 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews