Lapierre XELIUS SL 9.0 bicycle, purple
Lapierre XELIUS SL 9.0 bicycle
LAPIERRE Xelius SL 9.0 is the highest model of the Xelius 2022 series. The model with a Shimano Dura Ace Di2 set, which is used by peloton racers. The Xelius SL road bike has a frame and fork made of ultra-light carbon, reliable disc brakes, is aerodynamic, rigid and at the same time very light. The new wheels designed by LAPIERRE are equipped with wide rims and a NACA profile that improves stability at high speed and air penetration. The Powerbox technology of the rigid center, the lower frame tube and the lower chain struts ensures the most effective transfer of the rider's power to the forward movement of the bike. However, compared to the Xelius 2021 series, the model also has a new seat tube attachment system and an ultra-light one-piece cockpit. The cabling is fully integrated in the frame, while the frame itself is refined, has a lower weight and an elegant, at the same time, predatory design.Frame |
New Xelius SL Disc thru axle UD Superlight carbon
|
Fork |
New Xelius SL Disc thru axle UD Superlight carbon
|
Shifting |
Shimano Dura Ace Di2 BR9270 2x12 flat mount with Fin
|
Derailleur |
Shimano Dura-Ace Di2 RD-R9250A 12s
|
Derailleur |
Shimano Dura-Ace Di2 FD-R9250F
|
Cassette |
Shimano Dura Ace CS-R9200 11-30T 12s
|
Chain |
Shimano M9100 12s
|
Cranks |
Shimano Dura-Ace FC-R9200, 52-36T 170 mm (XS/S) / 172.5 mm (M/L) / 175 mm (XL)
|
Wheels |
Lapierre Carbon 28
|
Tires |
Continental GP5000S Tubeless ready 700x25C / Continental GP5000S Tubeless ready 700x25C
|
Seat post |
Lapierre carbon light, Ø: 27.2 mm, L: 350 mm
|
Saddle |
Fizik Argo Vento R5
|
Stem |
Lapierre, -5.7°, Ø: 31.8 mm, L: 90 mm (XS/S), 100 mm (M), 110 mm (L), 120 mm (XL)
|
Handlebars |
Lapierre UD carbon, Width: 400 mm (XS/S), 420 mm (M/L/XL)
|
Bar tape |
Lapierre Vexgel tape
|
Pedals |
VP-335 Clips&Strap
|
Model year | 2023 |
Gears | 2x12 |
Groupset | Shimano Dura-Ace |
Size | XS, S, M, L, XL |
Material | carbon fiber |
Wheel material | Carbon |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 151094 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews