Lapierre SHAPER 100, model 2020
Have you decided to start road cycling? Then the Lapierre Shaper fitness model will be a great stepping stone for you. Stable, comfortable and trustworthy frame is built for fast riding on asphalt bike paths and around the city. The frame is made of patented aluminum alloy Supreme 4.
Material: Aluminum
Wheel size: 700x35C
Frame: SHAPER SUPREME 4 ALLOY
Fork: SHAPER ALLOY FORK
Derailleur: SHIMANO ARDM310DL, 7s
Cranks: SHIMANO FC-TY301, FOR REAR 6/7/8 48X38X28T, W / CG 170 (S), 175 (M, L, XL)
Cassette: SHIMANO CS-HG200 7s 12-32T
Chain: YABAN YBN S50 1/2 "x3 / 32" 110L 7 / 8- SPD
Brakes: V-BRAKE SET HJ-721 ADX BLACK ALLOY
Gearing : SHIMANO ASTEF500 V-BRAKE 3x8s
Head composition: FSA No.10, ED 1-1 / 8 "
Handlebars: ALLOY BLACK AL6061, Barbora: 31.8mm, W: 640mm
Grips: Lapierre GRIPS
Stem: Lapierre 17 ° 90 mm
Seatpost : Lapierre 27.2x350mm
Saddle: SELLE ROYAL SHADOW
Front hub: SHIMANO TX500
Rear hub: SHIMANO TY500
Rims: FREEWAY D-WALL
Tires : MITAS FLASH 700x35C 37-622
Pedals: XERAMA SP-822N
Derailleur: Shimano Tourney AFDTY710TSL3 LOW CLAMP 34.9mm
Model year | 2020 |
Gears | 3x7 |
Groupset | Shimano Tourney |
Material | aluminium |
Brakes | V-brakes |
product ID | 88327 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews