Lapierre Pulsium 3.0 bicycle, green
Lapierre Pulsium 3.0 bicycle
Frame |
Pulsium Disc Thru Axle UD Carbon
|
Fork |
PULSIUM DISC THRU AXLE 100 % CARBON
|
Shifting |
Shimano Tiagra BR4720 2x10 flat mount without Fin
|
Derailleur |
SHIMANO TIAGRA RD-4700GS, 10s
|
Derailleur |
SHIMANO TIAGRA FD-4700F
|
Cassette |
SHIMANO HG500 10s 11-34T
|
Chain |
SHIMANO HG54
|
Cranks |
Shimano TIAGRA FC-4700, 50X34T 170 mm (XS, S), 172.5 mm (M), 175 mm (L, XL)
|
Brakes |
SHIMANO RT70 160/140 mm CENTERLOCK
|
Wheelset |
RYDE DP19 / SHIMANO RS470 Centerlock 32H
|
Seat post |
LAPIERRE ALLOY 3D FORGED 27.2x350 mm
|
Saddle |
Selle Italia X3 Boost
|
Stem |
LAPIERRE ALLOY -7° 31.8 mm, 80 mm (XS, S), 90 mm (M), 100 mm (L), 110 mm (XL)
|
Handlebars |
LAPIERRE ALLOY 40 cm (XS, S), 42 cm (M, L, XL)
|
Bar tape |
LAPIERRE TAPE
|
Headset |
Acros Integrated
|
Bottom bracket |
SHIMANO PRESSFIT SMBB7141B
|
Pedals |
VP-335 Clips&Strap
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 2x10 |
Groupset | Shimano Tiagra |
Size | XS - XL |
Colour | green |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 133296 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews