Lapierre AUDACIO 300 CP / TP, model 2019
Material: Aluminum
Year: 2019
Wheel size: 28 "
Frame: AUDACIA SUPREME 5 ALLOY
Fork: AUDACIA CARBON / ALLOY steerer
Derailleur: SHIMANO TIAGRA RD-R4700GS, 10s
Cranks: SHIMANO TIAGRA FC-R4703, 50x39x30T 170 mm (XS, S), 172.5 mm (M), 175 mm (L, XL, XXL)
Cassette: SHIMANO HG500 10s 11-34T
Chain: SHIMANO HG54
Brakes: SHIMANO TIAGRA BR-R4700
Gearing: SHIMANO TIAGRA ST-4700 3x10s
Head composition: FSA ZS 4D 1.1 / 8 "
Handlebars: Lapierre ALLOY 400 mm (XS, S), 420 mm (M, L), 440 mm (XL, XXL)
Grips: Lapierre TAPE
Stem: Lapierre ALLOY -7 ° 31.8 mm 90 mm (XS, S), 100 mm (M), 110 mm (L), 120 mm (XL, XXL)
Seatpost: Lapierre ALLOY 27.2x350 mm
Saddle: SELLE ITALIA X3
Tires: CONTINENTAL ULTRA SPORT 2 SL 700x25
Pedals: VP-335 CLIPS AND STRAP
Derailleur: SHIMANO TIAGRA FD-R4700BM
Model year | 2019 |
Gears | 3x10 |
Groupset | Shimano Tiagra |
Material | aluminium |
Brakes | Road rim brakes |
product ID | 64150 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews