Kellys ARC 30, model 2021
frame size S / M / L
fork KELLYS Carbon - 1.5 tapered steerer
main composition FSA 1.5 semi-integrated
middle composition SHIMANO BB-RS500
handles SHIMANO Sora R3000 (50x34T) - length 170mm (S), 175mm (M - L)
SHIMANO Sora ST-R3000 Dual Control
derailleur SHIMANO Sora R3000 (braze on)
SHIMANO Sora R3000 inverter (direct mount)
number of transfers 18
cassette pinion SHIMANO CS-HG300-9 (11-32T)
KMC X9 chain (108 articles)
TEKTRO brakes
brake levers SHIMANO Sora ST-R3000 Dual Control
SHIMANO Claris 2400 hubs (32 holes)
rims KELLYS Spark 622x15 (32 holes / riveted)
string stainless steel black
tires SCHWALBE Lugano K-Guard 25-622 (700x25C)
stem KLS Active Road - diam 28.6mm / bar bore 31.8mm / 6 ° / length 90mm (S), 100mm (M), 110mm (L)
KLS Active Road handlebars - diam 31.8mm / width 400m (S), 420mm (M), 440mm (L) handles KLS bar tape
seatpost KLS Active - diam 30.9mm / length 350mm (S - M), 400mm (L)
saddle KLS SlipStream cr-mo rails
Model year | 2021 |
Gears | 2x9 |
Groupset | Shimano Sora, Shimano Claris |
Material | aluminium |
Brakes | Road rim brakes |
product ID | 113464 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews