Giant Propel Advanced SL 1 bike, airglow
Giant Propel Advanced SL 1 bike
Frame |
Advanced SL-Grade Composite, integrated seatpost, disc
|
Fork |
Advanced SL-Grade Composite, full-composite OverDrive Aero steerer, disc
|
Shifting |
SRAM Force eTap AXS
|
Derailleur |
SRAM Force eTap AXS
|
Derailleur |
SRAM Force eTap AXS
|
Cassette |
SRAM Force, 12-speed, 10x28
|
Chain |
SRAM Force D1
|
Cranks |
SRAM Force D1 APR, 35/48T with Power Halo Power meter XS, S: 170 mm, M, M/L: 172.5 mm, L, XL: 175 mm
|
Brakes |
SRAM Force eTap AXS hydraulic, SRAM CenterLine XR rotors, (Front disc: 160 mm), (Rear disc: 140 mm)
|
Brake levers |
SRAM Force eTap AXS hydraulic
|
Rims |
CADEX 50 Disc WheelSystem, 50 mm
|
Hubs |
CADEX R1-S30 Low Friction Hub, CenterLock, 12 mm thru-axle
|
Spokes |
CADEX Aero Carbon Spoke
|
Tires |
CADEX Aero, tubeless, 700x25c (26.5 mm), folding
|
Seat post |
Advanced SL-Grade composite, integrated design, -5/+15mm offset
|
Saddle |
Giant Fleet SLR
|
Stem |
Giant Contact SLR Aero, OverDrive Aero XS: 80mm, S: 90mm, M: 100mm, M/L, L: 110mm, XL: 120mm
|
Handlebars |
Giant Contact SLR Aero XS, S: 40 cm, M, M/L: 42 cm, L, XL: 44 cm
|
Grips |
Stratus Lite 2.0
|
Bottom bracket |
SRAM DUB, press fit
|
Model year | 2023 |
Gears | 2x12 |
Groupset | Other |
Material | carbon fiber |
Wheel material | Carbon |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 244979 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews