Fuji Sportif 2.3, model 2020, red
Fork: FC-770 carbon integrated w / 1 1/8 "" alloy steerer
Cranks: Shimano FC-RS200, 50 / 34T
Middle composition: Sealed cartridge bearing
Pedals: Aero Road w / clips & straps
Derailleur: Shimano Claris, 34.9mm clamp
Derailleur: Shimano Claris
Gear: Shimano Claris Dual Control, 8-speed
Cassette: Shimano HG31, 11-34T
Chain: KMC HV700
Wheels: Vera Corsa DPM27, double wall, 24 / 28h, Formula road hubs
Tires: Vittoria Zaffiro, 700 x 30c
Brakes: Alloy dual pivot, 47mm-57mm reach
Brake levers: Shimano Claris
Head composition: 1 1/8 "" integrated
Handlebars: Oval Concepts 300S Shallow Drop, 6061 alloy, 31.8mm clamp, 133mm compact drop
Predstavec: Oval Concepts 313, 3D-forged 6061 stem points, +/- 7 degree
Grips: Oval Concepts 300 bar tape, suede
Saddle: Oval Concepts 344, steel rail
Seatpost: Oval Concepts 300, 6061 alloy, 27.2mm diameter
Weight: 10.12 kg
Model year | 2020 |
Gears | 2x8 |
Groupset | Shimano Claris |
Material | aluminium |
Brakes | Road rim brakes |
product ID | 78196 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews