Fuji Sportif 1.5 Disc Anthracite/ Green, model 2020
Fork: FC-440 full-carbon monocoque, quick-release axle w/ flat-mount disc tabs, tapered steerer
Cranks: Oval Concepts 300, forged 6066 arms, Praxis rings, 50/34T
Center composition: Praxis Works, threaded
Derailleur: Shimano Tiagra, 34.9mm clamp
Derailleur: Shimano Tiagra
Shifting: Shimano Tiagra Dual Control, 10-speed
Cassette: Shimano HG500, 11-34T
Chain: KMC X10 w/ MissingLink
Wheels: Vera Corsa DPD22, double wall, 28/32h, Formula disc hubs
Tires: Vittoria Zaffiro, 700 x 30c
Brakes: TRP Spyre C mechanical disc, 160mm rotors
Brake levers: Shimano Tiagra
Head composition: FSA, 1 1/8 upper - 1 1/2 lower, integrated
Handlebars: Oval Concepts 310 Ergo, 6061 alloy, 31.8mm clamp, 133mm drop, 4 sweep
Stem: Oval Concepts 313, 3D-forged 6061 stem points, +/-7
Saddle: Oval Concepts 344, steel rail
Seatpost: Oval Concepts 300, 6061 alloy, 27.2mm diameter
Weight: 9.86 kg
Model year | 2020 |
Gears | 2x10 |
Groupset | Shimano Tiagra |
Material | aluminium |
Brakes | Mechanical disc brakes |
product ID | 78194 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews